| Autor: |
Ghrib, Y., Frini-Srasra, N., Srasra, E. |
| Zdroj: |
Surface Engineering & Applied Electrochemistry; Jan2017, Vol. 53 Issue 1, p64-70, 7p |
| Abstrakt: |
Highly crystalline ZSM-5 zeolites are successfully prepared from kaolinite as low cost precursor. The effects of SiO/AlO molar ratio, the presence of tetrapropylammonium bromide (TPABr) and the initial precursor on the textural properties of the final products have been investigated. Crystallized samples have been characterized by scanning electron microscopy and nitrogen adsorption in addition to X-ray diffraction. The results show that getting pure ZSM-5 zeolite with a high crystallinity degree is directly dependent on the starting precursor as well as on the presence of the organic template highlighting the role of SiO/AlO molar ratio. The directed-template ZSM-5 sample prepared frommetakaolinite with the smallest particles (crystal size of 700 nm) and a maximum crystallinity of 98% is obtained at a SiO/AlO molar ratio of 31.69. Increasing the SiO/AlO molar ratio to 41.13 isrequired to prepare an organic-template free ZSM-5 from metakaolinite with a relative crystallinity of 81%. In order to synthesize ZSM-5 zeolite from the acid-activated metakaolinite as the only silica and alumina sources, a SiO/AlO molar ratio of 76.19 is used, the maximal crystallinity degree is 79%, with the largest ZSM crystals of about 3000 nm. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
Full text from SpringerLink