| Abstrakt: |
In this study, response surface methodology (RSM) based on a central composite rotatable design was applied to establish the optimum conditions for the methanolysis of Brassica napus (B. napus) seed oil. Four process variables were evaluated at two levels (24 experimental design): the methanol/oil molar ratio (3:1-12:1), the catalyst concentration in relation to oil mass (0.25-1.25 wt.% KOH), the reaction temperature (25-65 °C), and the alcoholysis reaction time (20-120min). The use of RSM resulted in a quadratic polynomial equation obtained by multiple regression analysis to predict transesterification. The results have shown that the methanol-oilmolar ratio and reaction time significantly affect the biodiesel yield. The highest biodiesel yield (95.7%) was obtained with the 8:1 methanol/oil ratio and 0.97% catalyst concentration at 55 °C reaction temperature for 70min reaction time. A linear relationship was noted between the observed and predicted values. The characteristics of biodiesel produced in the present study as revealed by gas chromatography analyses confirmed the existence of four major fatty acid methyl esters (FAME) (oleic-, linoleic-, linolenic-, and palmitic-acids). The fuel properties of B. napus oil methyl esters, i.e., cetane number, kinematic viscosity, oxidative stability, cloud point, pour point, cold filter plugging point, flash point, ash and sulfurcontents, acid value, copper strip corrosion, density, and higher heating value, were determined, which were within the limit of biodiesel standards such as ASTM D6751 and EN 14214. [ABSTRACT FROM AUTHOR] |
