| Autor: |
Waheed, Qari M.K., Wu, Chunfei, Williams, Paul T. |
| Předmět: |
|
| Zdroj: |
Journal of the Energy Institute (Elsevier Science); Nov2016, Vol. 89 Issue 4, p657-667, 11p |
| Abstrakt: |
The influence of process conditions on the production of syngas and H 2 from biomass in the form of rice husks was investigated using a two-stage pyrolysis/catalytic reforming reactor. The parameters investigated were, reforming temperature, steam flow rate and biomass particle size and the catalyst used was a 10 wt.% Ni–dolomite catalyst. Biomass was pyrolysed in the first stage, and the product volatiles were reformed in the second stage in the presence of steam and the Ni–dolomite catalyst. Increase in catalyst temperature from 850 °C to 1050 °C marginally improved total syngas yield. However, H 2 yield was increased from 20.03 mmol g −1 at 850 °C to 30.62 mmol g −1 at 1050 °C and H 2 concentration in the product gas increased from 53.95 vol.% to 65.18 vol.%. Raising the steam flow rate increased the H 2 yield and H 2 gas concentration. A significant increase in H 2 :CO ratio along with a decrease in CO:CO 2 ratio suggested a change in the equilibrium of the water gas shift reaction towards H 2 formation with increased steam flow rate. The influence of particle size on H 2 yield was small showing an increase in H 2 production when the particle size was reduced from 2.8–3.3 to 0.2–0.5 mm. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
Full Text from ScienceDirect