Autor: |
Englhard, M., Klemp, C., Behringer, M., Rudolph, A., Skibitzki, O., Zaumseil, P., Schroeder, T. |
Předmět: |
|
Zdroj: |
Journal of Applied Physics; 7/28/2016, Vol. 120 Issue 4, p1-7, 7p, 2 Diagrams, 1 Chart, 8 Graphs |
Abstrakt: |
This study reports a method to reuse GaAs substrates with a batch process for thin film light emitting diode (TF-LED) production. The method is based on an epitaxial lift-off technique. With the developed reclaim process, it is possible to get an epi-ready GaAs surface without additional time-consuming and expensive grinding/polishing processes. The reclaim and regrowth process was investigated with a one layer epitaxial test structure. The GaAs surface was characterized by an atomic force microscope directly after the reclaim process. The crystal structure of the regrown In0.5(Ga0.45Al0.55)0.5P (Q55) layer was investigated by high resolution x-ray diffraction and scanning transmission electron microscopy. In addition, a complete TF-LED grown on reclaimed GaAs substrates was electro-optically characterized on wafer level. The crystal structure of the epitaxial layers and the performance of the TF-LED grown on reclaimed substrates are not influenced by the developed reclaim process. This process would result in reducing costs for LEDs and reducing much arsenic waste for the benefit of a green semiconductor production. [ABSTRACT FROM AUTHOR] |
Databáze: |
Complementary Index |
Externí odkaz: |
|