| Autor: |
Satheesh Chandran, M., Sanil, K., Sunitha, K., Mathew, Dona, Rao, V. Lakshmana, Reghunadhan Nair, C.P. |
| Předmět: |
|
| Zdroj: |
Polymers for Advanced Technologies; Aug2016, Vol. 27 Issue 8, p984-992, 9p |
| Abstrakt: |
The influence of structural variations in bismaleimides (BMIs) on Alder-ene polymerization of O-allyl aralkyl phenolic resin [ O-allyl Xylok (OAX)] was examined. Toward this, three BMI functional monomers, viz. 2,2′-bis 4-[(4′-maleimido phenoxy) phenyl] propane (BMIP), 4,4′-Bismaleimido diphenyl methane (BMPM), and Bis 4-maleimidodiphenyl ether (BMPE), were blended with OAX in different molar ratios. The cure characterization revealed that the allyl-dominated blends cure by three distinct reaction steps whereas the maleimide-dominated blends exhibit a two-step reaction invariable with the maleimide structure. Introduction of more maleimide functionalities increased the Tg and thermal stability of the co-cured network. Differences in the storage modulus values and Tg of the BMI/OAX systems were correlated to the chemical structure of the BMI and crosslink density. Flexural, interlaminar shear strength (ILSS), and impact strength of the composites decreased systematically with the increase in maleimide content in the blend. Among the BMIs studied, Tg, thermal stability, and ILSS retention at elevated temperature were superior for BMPM/OAX blend owing to their high crosslink density and rigid backbone of the system. Allyl-rich compositions exhibited improved mechanical properties owing to the better resin-reinforcement interaction as revealed from morphological analysis by scanning electron microscopy. Copyright © 2016 John Wiley & Sons, Ltd. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
Plný text