| Autor: |
Santos, Tiago F. A., Torres, Edwar A., Hermengildo, Tahiana F. C., Ramirez, Antonio J. |
| Předmět: |
|
| Zdroj: |
Welding International; May2016, Vol. 30 Issue 5, p338-347, 10p, 3 Color Photographs, 7 Diagrams, 3 Charts, 1 Graph |
| Abstrakt: |
Usually, a workpiece is deformed during friction stir welding due to high applied loads. Consequently, fully and consolidated friction stir-welded joints as well as tool life time can be affected promoting unscheduled manufacturing stops, which favour decreasing the welding productivity. Furthermore, the workforce is dislocated to not predicted maintenance steps. This work proposes the development of a special ceramic backing to joining and processing material using FSW technologies. Four ceramic deposits were tested over a steel plate, which allowed selecting those with less porosity and, thus, better strength. This backing allowed us to obtain full penetration welds for duplex stainless steels, to high forces during engagement for high-strength low-alloy steels and to obtain consolidated aluminium–steel dissimilar joints. For the last one, there was not adherence of the soft material in the workpiece. In addition, the ceramic backing allowed us to confine the heat and plasticized metal, as well as develop established welding parameters. [ABSTRACT FROM PUBLISHER] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
