| Autor: |
Butson, Martin, Chen, Tom, Rattanavoang, Somkhit, Hellyer, James, Gray, Alison, Nelson, Vinod, Short, Richard, Rajapakse, Satya, Lee, James, Fogarty, Gerald, Izard, Michael, Hill, Robin |
| Zdroj: |
Australasian Physical & Engineering Sciences in Medicine; Dec2015, Vol. 38 Issue 4, p619-626, 8p |
| Abstrakt: |
Intraoral and external electron shields used in radiotherapy are designed to minimize radiation exposure to non-treatment tissue. Sites where shields are used include but are not limited to, the treatment of lips, cheeks and ears whilst shielding the underlying oral cavity, tongue, gingival or temporal region. A commonly known and published effect, concerns the enhancement in dose that can occur on the beam side on an electron shield caused by an increase in electron backscatter radiation. In this work a lead shield has been designed incorporating copper, aluminium and wax in a step down filter arrangement to minimise backscatter whilst minimizing overall shield thickness for better clinical setup and ease of use. For electron beams ranging from 6 to 10 MeV, a standard shield design of 4 mm lead, 0.6 mm copper, 1.0 mm aluminium and 1.5 mm wax (3.1 mm added filtration, 7.1 mm total thickness) provided adequate backscatter and transmission reduction to match a standard 4.5 mm lead and 10 mm wax (total thickness 14.5 mm) electron shield. Dose enhancement values of no more than 10 % were measured utilising this shield design with a 50 % reduction in shield thickness. The thinner shield will not only allow easier patient set up but should be tolerated better by patients when mucosal reactions occur as they place less physical pressure on these sites during treatment due to their smaller size. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
Full text from SpringerLink