| Autor: |
MILITARU, Laura-Mihaela, MOGOŞ, Paul Petruş, CONSTANTIN, Nicolae, ITTU, Sinziana, ANCA, Denisa-Elena, HARCEA, Lavinia-Marilena |
| Předmět: |
|
| Zdroj: |
Annals of the Faculty of Engineering Hunedoara - International Journal of Engineering; Nov2015, Vol. 13 Issue 4, p159-163, 5p |
| Abstrakt: |
The characterization of iron ore particles is vital importance for the studies of the mineral composition. The specific surface area of iron ore particles can be measured by laser diffraction, and mathematical models (based on the size distribution). Particle size fractions and chemical composition were determined of several types of iron ore (symbolically marked A, B, C, D, E, F). These features have direct influence on the sintering process by particle size analysis, permeability, reducibility, porosity, CaO/SiO ratio, influence of MnO in sinter. The granulation experiment show that these minerals (more than 50% with diameters of <1mm) can be successfully used in the sintering process, or by alloying with other minerals in Europe. Large irregularly shaped and adhesive particles can get a higher efficiency of granulation easily. The usage of iron ore with big and rough particles can improve the permeability while the iron ore with smooth and sphere particles has poor ability of granulation. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
