| Autor: |
Marakhovskiy, P., Kondrashov, S., Dyachkova, T., Gurevich, Ya., Mayorova, I., Shvedkova, A., Valevin, E., Yurkov, G. |
| Zdroj: |
Inorganic Materials: Applied Research; Sep2015, Vol. 6 Issue 5, p515-520, 6p |
| Abstrakt: |
Epoxy compositions cured in various temperature-time modes are studied by thermal analysis methods before and after modification by functionalized carbon nanotubes (FCNT). In the conditions where a formed network is not uniform and, thus, is characterized by a wide variety of different structural elements with different segmental mobility, the modification of epoxy resins leads to networks with less defects. In this case, the moisture sorption of the modified samples is lower as compared to the unmodified matrix. In the case where the selected temperature-time mode provides less defective networks in the starting sample, the moisture absorption of the modified sample is higher as compared to the unmodified one. It is shown that the mechanism of plasticizing of the FCN modified binders at moisture saturation depends on the mode of curing, differs from that of the unmodified samples, and requires further investigation. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
Full text from SpringerLink