Influence of the Metering Chamber Volume and Actuator Design on the Aerodynamic Particle Size of a Metered Dose Inhaler.

Autor: Berry, Julianne, Heimbecher, Susan, Hart, John L., Sequeira, Joel
Předmět:
Zdroj: Drug Development & Industrial Pharmacy; Sep2003, Vol. 29 Issue 8, p865-876, 12p
Abstrakt: Presented in this work are the results of a study designed to investigate the impact of the valve metering chamber volume and actuator design on the aerodynamic particle size distribution (PSD) of a suspension metered dose inhaler (MDI) containing propellant HFA-227. It was hypothesized that the valve metering volume and the actuator design in the MDI could influence the PSD of the emitted dose since it would affect the aerosol spray dynamics. The PSD results from this study, measured using cascade impaction, revealed that samples containing an actuator intended for oral delivery (rectangular mouthpiece and orifice diameter of ≈0.5 mm) produced a higher fine particle dose (FPD) than those containing an actuator intended for nasal delivery (circular nosetip and orifice diameter of ≈1 mm). In addition, the drug PSD profile was shown to be more sensitive to differences in the particle size of the suspended material when the oral actuator was used compared to when the nasal actuator was used. The valve metering chamber (25 vs. 63 μL volume) did not appear to have a major effect on the product aerodynamic PSD or the droplet size. These results demonstrate the importance of actuator design and orifice size in determining the aerodynamic PSD of an MDI. [ABSTRACT FROM AUTHOR]
Databáze: Complementary Index
Externí odkaz:
Nepřihlášeným uživatelům se plný text nezobrazuje