| Autor: |
Fuketa, H., Hirairi, K., Yasufuku, T., Takamiya, M., Nomura, M., Shinohara, H., Sakurai, T. |
| Předmět: |
|
| Zdroj: |
IEEE Transactions on Very Large Scale Integration (VLSI) Systems; Jun2013, Vol. 21 Issue 6, p1175-1179, 5p |
| Abstrakt: |
To achieve the most energy-efficient operation, this brief presents a circuit design technique for separating the power supply voltage (VDD) of flip-flops (FFs) from that of combinational circuits, called the higher voltage FF (HVFF). Although VDD scaling can reduce the energy, the minimum operating voltage (VDDmin) of FFs prevents the operation at the optimum supply voltage that minimizes the energy, because the VDDmin of FFs is higher than the optimum supply voltage. In HVFF, the VDD of combinational logic gates is reduced below the VDDmin of FFs while keeping the VDD of FFs at their VDDmin. This makes it possible to minimize the energy without power and delay penalties at the nominal supply voltage (1.2 V) as well as without FF topological difications. A 16-bit integer unit with HVFF is fabricated in a 65-nm CMOS process, and measurement results show that HVFF reduces the minimum energy by 13% compared with the conventional operation, which is 1/10 times smaller than the energy at the nominal supply voltage. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
