| Autor: |
Radhi, Wisam A., Jasim, Shaymaa H., shaban, Raed muslim, Ibrahem, Ibrahem K., Mohammed, Faise J. |
| Předmět: |
|
| Zdroj: |
Journal of Basrah Researches (Sciences); 2014, Vol. 40 Issue 3A, p48-58, 11p |
| Abstrakt: |
The Mechanical properties of (High Density Polyethylene (HDPE)-M624): shells powder Cocos nucifera composite was assessed with respect to the effect of filler content Cocos nucifera varying from 2.5% to 15% by weight in the composite. Obvious improvement in the mechanical parameters was recorded when adding shells powder Cocos nucifera composite with 2.5% weight ratio. The mechanical properties of loaded film have been evaluated through several parameters concerning the elastic deformation based on measuring the load -- elongation characteristics. The behavior of the stress - strain curve was analyzed in terms of the cold drawing model. Experimental difficulties appeared above 5% mixing ratio, and these difficulties were due to the separation in phase which makes the sample processing impossible. Experimental results showed that elastic behavior increased with increasing shells powder Cocos nucifera filler up to 2.5 % concentration, While 10% the best ratio of flame resistance. [ABSTRACT FROM AUTHOR] |
| Databáze: |
Complementary Index |
| Externí odkaz: |
|
