| Autor: |
Offerdahl CD; Cardiovascular Engineering Laboratory, North Dakota State University, Fargo 58105, USA., Schaub JD, Koenig SC, Swope RD, Ewert DL |
| Jazyk: |
angličtina |
| Zdroj: |
Biomedical sciences instrumentation [Biomed Sci Instrum] 1996; Vol. 32, pp. 183-8. |
| Abstrakt: |
An in-vitro (hydrodynamic) model of the circulatory system was developed. The model consisted of a pump, compliant tubing, and valves for resistance. The model is used to simulate aortic pressure and flow. These parameters were measured using a Konigsburg Pressure transducer and a Triton ART2 flow probe. In addition, venous pressure and flow were measured on the downstream side of the resistance. The system has a known compliance and resistance. Steady and pulsatile flow tests were conducted to determine the resistance of the model. A static compliance test was used to determine the compliance of the system. The aortic pressure and flow obtained from the hydrodynamic model will be used to test the accuracy of parameter estimation models such as the 2-element and 4-element Windkessel models and the 3-element Westkessel model. Verifying analytical models used in determining total peripheral resistance (TPR) and systemic arterial compliance (SAC) is important because it provides insight into hemodynamic parameters that indicate baroreceptor responsiveness to situations such as changes in gravitational acceleration. |
| Databáze: |
MEDLINE |
| Externí odkaz: |
|
