Green nanotechnology for the enhancement of antibacterial properties in lining leather: MgO-chitosan nanocomposite coating.
| Autor: | Ahmed S; Department of Leather Engineering, Institute of Leather Engineering and Technology, University of Dhaka, 44-50, Hazaribagh, Dhaka-1209, Bangladesh., Imon SS; Department of Leather Engineering, Institute of Leather Engineering and Technology, University of Dhaka, 44-50, Hazaribagh, Dhaka-1209, Bangladesh., Hasan MJ; Department of Leather Engineering, Institute of Leather Engineering and Technology, University of Dhaka, 44-50, Hazaribagh, Dhaka-1209, Bangladesh., Alam MS; Department of Leather Engineering, Institute of Leather Engineering and Technology, University of Dhaka, 44-50, Hazaribagh, Dhaka-1209, Bangladesh. |
|---|---|
| Jazyk: | angličtina |
| Zdroj: | Heliyon [Heliyon] 2024 Oct 12; Vol. 10 (20), pp. e39170. Date of Electronic Publication: 2024 Oct 12 (Print Publication: 2024). |
| DOI: | 10.1016/j.heliyon.2024.e39170 |
| Abstrakt: | Antimicrobial nanomaterials have received a lot of interest in recent years due to their potential to fight against microbial degradation, a common problem in leather products. In this study, a nanocomposite was synthesized with MgO nanoparticles prepared by Aloe vera leaf extract and chitosan (CS), as an innovative solution to this problem. Three nanocomposite samples (C1, C2, and C3) were formulated with varying ratios of MgO and chitosan and evaluated for antimicrobial efficacy against Escherichia coli and Bacillus subtilis. Leather treated with MgO/Chitosan nanocomposite (MgO/Chitosan-1:1) exhibited substantial inhibition zones of 13 mm and 12 mm against E. coli and B. subtilis , respectively. Characterization of MgO nanoparticles, chitosan, and MgO/CS nanocomposite was performed through FTIR, XRD, SEM, TGA, and cytotoxicity tests. The average particle size and crystallite size of MgO nanoparticles were found as 136 nm and 10.3 nm, respectively and a weight loss of 67 % for MgO/CS nanocomposite in thermogravimetric analysis. FTIR confirmed the successful incorporation of MgO nanoparticles into the chitosan matrix, evidenced by the presence of characteristic functional groups. Application of nanocomposite onto lining leather via spraying resulted in finished leather with improved color rub fastness, perspiration fastness, and thermal stability compared to untreated leather. In comparison to dry color rub fastness, wet color rub fastness was notably improved by the MgO/CS nanocomposite, with gray scale ratings ranging from 4/5 to 5. Perspiration fastness was marginally enhanced by the MgO/CS coating, with gray scale ratings ranging from 4/5 to 5 for both grain and flesh samples. Specifically, the coated leather exhibited a water vapor permeability (WVP) of 9.94 mg cm -2 .hr -1 that was lower than both uncoated (12.37 mg cm -2 .hr -1 ) and PVA-coated (11.22 mg cm -2 .hr -1 ) leather. This study presents a promising solution to the challenge of microbial degradation in leather products and highlights the potential of natural sources for synthesizing functional nanocomposites with diverse applications in materials science and biotechnology. Competing Interests: The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper. (© 2024 The Authors.) |
| Databáze: | MEDLINE |
| Externí odkaz: |
|