Finite-element analysis of different fixation types after Enneking II + III pelvic tumor resection.

Autor: Sun Y; Orthopaedic Hospital, The Second Hospital of Jilin University, Changchun, 130012, China., Xue H; Orthopaedic Hospital, The Second Hospital of Jilin University, Changchun, 130012, China., Wang X; Orthopaedic Hospital, The Second Hospital of Jilin University, Changchun, 130012, China., Zhang J; Orthopaedic Hospital, The Second Hospital of Jilin University, Changchun, 130012, China., Xu Z; Key Laboratory of Engineering Bionics, Ministry of Education, Jilin University, Changchun, 130012, China., Guo Y; Key Laboratory of Engineering Bionics, Ministry of Education, Jilin University, Changchun, 130012, China., Xin R; Key Laboratory of Engineering Bionics, Ministry of Education, Jilin University, Changchun, 130012, China., Yu Z; Key Laboratory of Engineering Bionics, Ministry of Education, Jilin University, Changchun, 130012, China., Han Q; Orthopaedic Hospital, The Second Hospital of Jilin University, Changchun, 130012, China., Zhao X; Orthopaedic Hospital, The Second Hospital of Jilin University, Changchun, 130012, China. xzhao@jlu.edu.cn., Wang J; Orthopaedic Hospital, The Second Hospital of Jilin University, Changchun, 130012, China. wangjinc@jlu.edu.cn., Ren L; Key Laboratory of Engineering Bionics, Ministry of Education, Jilin University, Changchun, 130012, China. lqren@jlu.edu.cn.
Jazyk: angličtina
Zdroj: Scientific reports [Sci Rep] 2024 Sep 06; Vol. 14 (1), pp. 20878. Date of Electronic Publication: 2024 Sep 06.
DOI: 10.1038/s41598-024-71334-1
Abstrakt: The current primary treatment approach for malignant pelvic tumors involves hemipelvic prosthesis reconstruction following tumor resection. In cases of Enneking type II + III pelvic tumors, the prosthesis necessitates fixation to the remaining iliac bone. Prevailing methods for prosthesis fixation include the saddle prosthesis, ice cream prosthesis, modular hemipelvic prosthesis, and personalized prosthetics using three-dimensional printing. To prevent failure of hemipelvic arthroplasty protheses, a novel fixation method was designed and finite element analysis was conducted. In clinical cases, the third and fourth sacral screws broke, a phenomenon also observed in the results of finite element analysis. Based on the original surgical model, designs were created for auxiliary dorsal iliac, auxiliary iliac bottom, auxiliary sacral screw, and auxiliary pubic ramus fixation. A nonlinear quasi-static finite element analysis was then performed under the maximum load of the gait cycle, and the results indicated that assisted sacral dorsal fixation significantly reduces stress on the sacral screws and relative micromotion exceeding 28 μm. The fixation of the pubic ramus further increased the initial stability of the prosthesis and its interface osseointegration ability. Therefore, for hemipelvic prostheses, incorporating pubic ramus support and iliac back fixation is advisable, as it provides new options for the application of hemipelvic tumor prostheses.
(© 2024. The Author(s).)
Databáze: MEDLINE
Externí odkaz:
Nepřihlášeným uživatelům se plný text nezobrazuje