Mechanical properties of dual-polymerizing resin-core material, dual-polymerizing resin cement, and bulk-fill composite resin used for restoring endodontically treated teeth.

Autor: Mendoza LCL; PhD student, Department of Operative Dentistry and Dental Materials, School of Dentistry, Federal University of Uberlândia (UFU), Uberlândia, MG, Brazil., Peres TS; PhD student, Department of Operative Dentistry and Dental Materials, School of Dentistry, Federal University of Uberlândia (UFU), Uberlândia, MG, Brazil., Estevão IDG; Undergraduate student, Department of Operative Dentistry and Dental Materials, School of Dentistry, Federal University of Uberlândia (UFU), Uberlândia, MG, Brazil., Ribeiro MTH; PhD student, Department of Operative Dentistry and Dental Materials, Dental School, Federal University of Uberlândia, Uberlândia, MG, Brazil., de Melo C; MSc student, Department of Operative Dentistry and Dental Materials, School of Dentistry, Federal University of Uberlândia (UFU), Uberlândia, MG, Brazil., Carlos HL; Professor, Department of Operative Dentistry and Dental Materials, School of Dentistry, Federal University of Uberlândia (UFU), Uberlândia, MG, Brazil., Soares CJ; Professor, Department of Operative Dentistry and Dental Materials, School of Dentistry, Federal University of Uberlândia (UFU), Uberlândia, MG, Brazil. Electronic address: carlosjsoares@ufu.br.
Jazyk: angličtina
Zdroj: The Journal of prosthetic dentistry [J Prosthet Dent] 2024 Sep 02. Date of Electronic Publication: 2024 Sep 02.
DOI: 10.1016/j.prosdent.2024.08.007
Abstrakt: Statement of Problem: How resin-based material and a light-activation protocol influence the mechanical properties of materials used to cement glass fiber post-and-cores in endodontically treated teeth is unclear.
Purpose: The purpose of this in vitro study was to evaluate the influence of immediate or 5-minute delayed light activation on the mechanical properties of dual-polymerizing resin cements and dual-polymerizing resin-core materials compared with bulk-fill composite resins.
Material and Methods: Nine resin-based materials were tested: 4 dual-polymerizing resin-core materials, (Allcem Core; FGM, LuxaCore Z; DMG, Rebilda DC; VOCO, and (Clearfil DC Core Plus; KURARAY), 3 dual-polymerizing resin cements, (RelyX Universal; 3M ESPE, RelyX U200; 3M ESPE, and Allcem Dual; FGM), and 2 bulk-fill composite resins, (Opus Bulk Fill APS; FGM, and Filtek One Bulk Fill; 3M ESPE). The dual-polymerizing materials were light activated using both protocols. The postgel shrinkage (Shr), flexural strength (FS), elastic modulus (E), Knoop hardness (KH), degree of conversion (DC), and depth of polymerization (DoP) were measured (n=10). The data for Shr, FS, E, and DoP were analyzed using 2-way ANOVA, and for KH and DC using 2-way repeated measurement ANOVA and the Tukey HSD test (α=.05).
Results: A 5-minute delay before light-activation significantly reduced Shr for all materials (P<.001). Increasing the depth significantly reduced the KH for all materials (P<.001). Bulk-fill composite resins and dual-polymerizing resin-core had higher KH values than dual-polymerizing resin cements (P<.001).
Conclusions: Delayed 5-minute light-activation reduced postgel shrinkage and had no negative effect on mechanical properties. Dual-polymerizing resin-core materials exhibited higher KH values than dual-polymerizing resin cement and mechanical properties similar to those of bulk-fill composite resin.
(Copyright © 2024. Published by Elsevier Inc.)
Databáze: MEDLINE
Externí odkaz: