| Autor: |
Shpotyuk O; Institute of Physics, Jan Dlugosz University in Częstochowa, 13/15, al. Armii Krajowej, 42-200 Częstochowa, Poland.; O.G. Vlokh Institute of Physical Optics, Ivan Franko National University of Lviv, 23, Dragomanov Str., 79005 Lviv, Ukraine., Hyla M; Institute of Physics, Jan Dlugosz University in Częstochowa, 13/15, al. Armii Krajowej, 42-200 Częstochowa, Poland., Ingram A; Faculty of Physics, Opole University of Technology, 75, Ozimska Str., 45370 Opole, Poland., Shpotyuk Y; Department of Sensor and Semiconductor Electronics, Ivan Franko National University of Lviv, 107, Tarnavskoho Str., 79017 Lviv, Ukraine.; Institute of Physics, University of Rzeszow, 1, Pigonia Str., 35-959 Rzeszow, Poland., Boyko V; O.G. Vlokh Institute of Physical Optics, Ivan Franko National University of Lviv, 23, Dragomanov Str., 79005 Lviv, Ukraine., Demchenko P; Department of Inorganic Chemistry, Ivan Franko National University of Lviv, 6, Kyryla i Mefodiya Str., 79000 Lviv, Ukraine., Wojnarowska-Nowak R; Center for Microelectronics and Nanotechnology, Institute of Materials Engineering, University of Rzeszow, 1, Pigonia Str., 35-959 Rzeszow, Poland., Lukáčová Bujňáková Z; Institute of Geotechnics of Slovak Academy of Sciences, 45, Watsonova Str., 04001 Košice, Slovakia., Baláž P; Institute of Geotechnics of Slovak Academy of Sciences, 45, Watsonova Str., 04001 Košice, Slovakia. |
| Abstrakt: |
Binary As x Se 100-x alloys from the border of a glass-forming region (65 < x < 70) subjected to nanomilling in dry and dry-wet modes are characterized by the XRPD, micro-Raman scattering (micro-RS) and revised positron annihilation lifetime (PAL) methods complemented by a disproportionality analysis using the quantum-chemical cluster modeling approach. These alloys are examined with respect to tetra-arsenic biselenide As 4 Se 2 stoichiometry, realized in glassy g-As 65 Se 35 , glassy-crystalline g/c-As 67 Se 33 and glassy-crystalline g/c-As 70 Se 30 . From the XRPD results, the number of rhombohedral As and cubic arsenolite As 2 O 3 phases in As-Se alloys increases after nanomilling, especially in the wet mode realized in a PVP water solution. Nanomilling-driven amorphization and reamorphization transformations in these alloys are identified by an analysis of diffuse peak halos in their XRPD patterning, showing the interplay between the levels of a medium-range structure (disruption of the intermediate-range ordering at the cost of an extended-range one). From the micro-RS spectroscopy results, these alloys are stabilized by molecular thioarsenides As 4 Se n ( n = 3, 4), regardless of their phase composition, remnants of thioarsenide molecules destructed under nanomilling being reincorporated into a glass network undergoing a polyamorphic transition. From the PAL spectroscopy results, volumetric changes in the wet-milled alloys with respect to the dry-milled ones are identified as resulting from a direct conversion of the bound positron-electron (Ps, positronium) states in the positron traps. Ps-hosting holes in the PVP medium appear instead of positron traps, with ~0.36-0.38 ns lifetimes ascribed to multivacancies in the As-Se matrix. The superposition of PAL spectrum peaks and tails for pelletized PVP, unmilled, dry-milled, and dry-wet-milled As-Se samples shows a spectacular smoothly decaying trend. The microstructure scenarios of the spontaneous (under quenching) and activated (under nanomilling) decomposition of principal network clusters in As 4 Se 2 -bearing arsenoselenides are recognized. Over-constrained As 6·(2/3) ring-like network clusters acting as pre-cursors of the rhombohedral As phase are the main products of this decomposition. Two spontaneous processes for creating thioarsenides with crystalline counterparts explain the location of the glass-forming border in an As-Se system near the As 4 Se 2 composition, while an activated decomposition process for creating layered As 2 Se 3 structures is responsible for the nanomilling-driven molecular-to-network transition. |
