| Autor: |
Altan D; Faculty of Chemical and Metallurgical Engineering, Department of Bioengineering, Yildiz Technical University, 34220 Istanbul, Türkiye.; Health Biotechnology Joint Research and Application Center of Excellence, 34903 Istanbul, Türkiye., Özarslan AC; Faculty of Chemical and Metallurgical Engineering, Department of Bioengineering, Yildiz Technical University, 34220 Istanbul, Türkiye.; Health Biotechnology Joint Research and Application Center of Excellence, 34903 Istanbul, Türkiye., Özel C; Faculty of Chemical and Metallurgical Engineering, Department of Bioengineering, Yildiz Technical University, 34220 Istanbul, Türkiye.; Health Biotechnology Joint Research and Application Center of Excellence, 34903 Istanbul, Türkiye., Tuzlakoğlu K; Department of Polymer Engineering, Yalova University, 77200 Yalova, Türkiye., Sahin YM; Polymer Technologies and Composite Application and Research Center, Istanbul Arel University, 34537 Istanbul, Türkiye.; Faculty of Engineering, Department of Biomedical Engineering, Istanbul Arel University, 34537 Istanbul, Türkiye., Yücel S; Faculty of Chemical and Metallurgical Engineering, Department of Bioengineering, Yildiz Technical University, 34220 Istanbul, Türkiye.; Health Biotechnology Joint Research and Application Center of Excellence, 34903 Istanbul, Türkiye. |
| Abstrakt: |
Several therapeutic approaches have been developed to promote bone regeneration, including guided bone regeneration (GBR), where barrier membranes play a crucial role in segregating soft tissue and facilitating bone growth. This study emphasizes the importance of considering specific tissue requirements in the design of materials for tissue regeneration, with a focus on the development of a double-layered membrane to mimic both soft and hard tissues within the context of GBR. The hard tissue-facing layer comprises collagen and zinc-doped bioactive glass to support bone tissue regeneration, while the soft tissue-facing layer combines collagen and chitosan. The electrospinning technique was employed to achieve the production of nanofibers resembling extracellular matrix fibers. The production of nano-sized (~116 nm) bioactive glasses was achieved by microemulsion assisted sol-gel method. The bioactive glass-containing layers developed hydroxyapatite on their surfaces starting from the first week of simulated body fluid (SBF) immersion, demonstrating that the membranes possessed favorable bioactivity properties. Moreover, all membranes exhibited distinct degradation behaviors in various mediums. However, weight loss exceeding 50% was observed in all tested samples after four weeks in both SBF and phosphate-buffered saline (PBS). The double-layered membranes were also subjected to mechanical testing, revealing a tensile strength of approximately 4 MPa. The double-layered membranes containing zinc-doped bioactive glass demonstrated cell viability of over 70% across all tested concentrations (0.2, 0.1, and 0.02 g/mL), confirming the excellent biocompatibility of the membranes. The fabricated polymer bioactive glass composite double-layered membranes are strong candidates with the potential to be utilized in tissue engineering applications. |
