A new method of magnetic pulse welding of dissimilar metal plates using a uniform pressure electromagnetic actuator based on pre-deformation.

Autor: Zhang H; College of Energy Engineering, Huanghuai University, Zhumadian, 463000, People's Republic of China. zhanghang@huanghuai.edu.cn., Ding H; Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan, 430074, People's Republic of China., Li X; Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan, 430074, People's Republic of China., Cao Q; Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan, 430074, People's Republic of China. quanliangcao@mail.hust.edu.cn.
Jazyk: angličtina
Zdroj: Scientific reports [Sci Rep] 2024 Jul 26; Vol. 14 (1), pp. 17226. Date of Electronic Publication: 2024 Jul 26.
DOI: 10.1038/s41598-024-68191-3
Abstrakt: The magnetic pulse welding method using a uniform pressure electromagnetic actuator can effectively weld dissimilar metal plates. However, the existing uniform pressure welding method leads to serious thinning of the plate at the chamfer, lack of welding at the center, and bulging of the welded sample, which seriously affects the quality of the welded joint. To solve these problems and improve the quality of welded joints, a new uniform pressure welding method of dissimilar metal plates based on pre-deformation was developed in this work. In this study, using the welding of an AA1060 aluminum plate and an SS304 steel plate with a thickness of 1 mm as an example, it was confirmed through numerical simulation and experimental research that the pre-deformation of the flyer plate controlled the impact angle of the central area of the plate, and it effectively suppressed central non-welding and serious bulge issues. Further, the welding method also reduced the height of the cushion blocks on both sides, thus mitigating aluminum plate thinning at the chamfer, ultimately improving the tensile strength of the joint. Additionally, a microscopic observation showed that the welding interface formed a wavy composite interface, and the connection strength was good. This welding method can also be extended to welding other dissimilar metal plates.
(© 2024. The Author(s).)
Databáze: MEDLINE
Externí odkaz:
Nepřihlášeným uživatelům se plný text nezobrazuje