Experimental Study of Needle Insertion into Gerbil Tympanic Membrane.

Autor: Mohammadi H; Department of Systems Design Engineering, University of Waterloo, Waterloo, ON, Canada.; Centre for Bioengineering and Biotechnology, University of Waterloo, Waterloo, ON, Canada., Ebrahimian A; Department of Systems Design Engineering, University of Waterloo, Waterloo, ON, Canada.; Centre for Bioengineering and Biotechnology, University of Waterloo, Waterloo, ON, Canada., Maftoon N; Department of Systems Design Engineering, University of Waterloo, Waterloo, ON, Canada. nmaftoon@uwaterloo.ca.; Centre for Bioengineering and Biotechnology, University of Waterloo, Waterloo, ON, Canada. nmaftoon@uwaterloo.ca.
Jazyk: angličtina
Zdroj: Journal of the Association for Research in Otolaryngology : JARO [J Assoc Res Otolaryngol] 2024 Oct; Vol. 25 (5), pp. 427-450. Date of Electronic Publication: 2024 Jul 11.
DOI: 10.1007/s10162-024-00953-2
Abstrakt: The perforation characteristics and fracture-related mechanical properties of the tympanic membrane (TM) greatly affect surgical procedures like myringotomy and tympanostomy performed on the middle ear. We analyzed the most important features of the gerbil TM perforation using an experimental approach that was based on force measurement during a 2-cycle needle insertion/extraction process. Fracture energy, friction energy, strain energy, and hysteresis loss were taken into consideration for the analysis of the different stages of needle insertion and extraction. The results demonstrated that (1) although the TM shows viscoelastic behavior, the contribution of hysteresis loss was negligible compared to other irreversible dissipated energy components (i.e., fracture energy and friction energy). (2) The TM puncture force did not substantially change during the first hours after animal death, but interestingly, it increased after 1 week due to the drying effects of soft tissue. (3) The needle geometry affected the crack length and the most important features of the force-displacement plot for the needle insertion process (puncture force, puncture displacement, and jump-in force) increased with increasing needle diameter, whereas the insertion velocity only changed the puncture and jump-in forces (both increased with increasing insertion velocity) and did not have a noticeable effect on the puncture displacement. (4) The fracture toughness of the gerbil TM was almost independent of the needle geometry and was found to be around 0.33 ± 0.10 kJ/m 2 .
(© 2024. The Author(s) under exclusive licence to Association for Research in Otolaryngology.)
Databáze: MEDLINE
Externí odkaz: