| Autor: |
Kelly TW, Rikimi S, Davidson IA, Chen Y, Bawn S, Bradley TD, Taranta AA, Poletti F, Richardson DJ, Horak P, Wheeler NV |
| Jazyk: |
angličtina |
| Zdroj: |
Optics express [Opt Express] 2024 Jun 03; Vol. 32 (12), pp. 20459-20470. |
| DOI: |
10.1364/OE.517755 |
| Abstrakt: |
When a hollow core fiber is drawn, the core and cladding holes within the internal cane geometry are pressurized with an inert gas to enable precise control over the internal microstructure of the fiber and counteract surface tension forces. Primarily by considering the temperature drop as the fiber passes through the furnace and the geometrical transformation of the internal microstructure from preform-to-fiber, we recently established that the gas pressure within the final 'as-drawn' fiber is substantially below atmospheric pressure. We have also established that slight changes in the gas refractive index within the core and surrounding cladding holes induced by changes in gas pressure are sufficient to significantly affect both the modality and loss of the fiber. Here we demonstrate, through both simulations and experimental measurements, that the combination of these effects leads to transient changes in the fiber's attenuation when the fibers are opened to atmosphere post-fabrication. It is important to account for this phenomenon for accurate fiber characterization, particularly when long lengths of fiber are drawn where it could take many weeks for every part of the internal microstructure to reach atmospheric pressure. |
| Databáze: |
MEDLINE |
| Externí odkaz: |
|
