| Autor: |
Liu X; College of Fashion and Design, Donghua University, China., Tian M; College of Fashion and Design, Donghua University, China.; Protective Clothing Research Center, Donghua University, China.; Key Laboratory of Clothing Design and Technology, Ministry of Education, Donghua University, Shanghai, China., Wang Y; College of Fashion and Design, Donghua University, China.; Protective Clothing Research Center, Donghua University, China.; Key Laboratory of Clothing Design and Technology, Ministry of Education, Donghua University, Shanghai, China. |
| Abstrakt: |
Objectives . Currently, numerous studies have focused on testing or modeling to evaluate the safe service life of thermal protective clothing after thermal aging, reducing the risk to occupational personnel. However, testing will render the garment unsuitable for subsequent use and a series of input parameters for modeling are not readily available. In this study, a novel image recognition strategy was proposed to discriminate the mechanical strength of thermal protective fabric after thermal aging based on transfer learning. Methods . Data augmentation was used to overcome the shortcoming of insufficient training samples. Four pre-trained models were used to explore their performance in three sample classification modes. Results . The experimental results show that the VGG-19 model achieves the best performance in the three-classification mode (accuracy = 91%). The model was more accurate in identifying fabric samples in the early and late stages of strength decline. For fabric samples in the middle stage of strength decline, the three-classification mode was better than the four-classification and six-classification modes. Conclusions . The findings provide novel insights into the image-based mechanical strength evaluation of thermal protective fabrics after aging. |
