Effects of hexagonal boron nitride on mechanical properties of bone cement (Polymethylmethacrylate).
| Autor: | Perçin A; Cizre Devlet Hastanesi Ortopedi ve Travmatoloji Kliniği, 73200 Cizre, Şırnak, Türkiye. alipercin1903@gmail.com., Yapar A, Tokgöz MA, Yaş S, Baymurat AC, Selek HY |
|---|---|
| Jazyk: | angličtina |
| Zdroj: | Joint diseases and related surgery [Jt Dis Relat Surg] 2024 Feb 26; Vol. 35 (2), pp. 340-346. Date of Electronic Publication: 2024 Feb 26. |
| DOI: | 10.52312/jdrs.2024.1513 |
| Abstrakt: | Objectives: The aim of this study was to investigate the effects of adding hexagonal boron nitride at four different concentrations to polymethylmethacrylate (PMMA) bone cement, which is commonly used in orthopedic surgeries, on the mechanical properties and microarchitecture of the bone cement. Materials and Methods: The study included an unaltered control group and groups containing four different concentrations (40 g of bone cement with 0.5 g, 1 g, 1.5 g, 2 g) of hexagonal boron nitride. The samples used for mechanical tests were prepared at 20±2ºC in operating room conditions, using molds in accordance with the test standards. As a result of the tests, the pressure values at which the samples deformed were determined from the load-deformation graphs, and the megapascal (MPa) values at which the samples exhibited strength were calculated. Results: The samples with 0.5 g boron added to the bone cement had significantly increased mechanical strength, particularly in the compression test. In the group where 2 g boron was added, it was noted that, compared to the other groups, the strength pressure decreased and the porosity increased. The porosity did not change particularly in the group where 0.5 g boron was added. Conclusion: Our study results demonstrate that adding hexagonal boron nitride (HBN) to bone cement at a low concentration (0.5 g / 40 g PPMA) significantly increases the mechanical strength in terms of MPa (compression forces) without adversely affecting porosity. However, the incorporation of HBN at higher concentrations increases porosity, thereby compromising the biomechanical properties of the bone cement, as evidenced by the negative impact on compression and four-point bending tests. Boron-based products have gained increased utilization in the medical field, and HBN is emerging as a promising chemical compound, steadily growing in significance. |
| Databáze: | MEDLINE |
| Externí odkaz: |
|