Comparative evaluation on wear resistance of metal sleeve, sleeve-free resin, and reinforced sleeve-free resin implant guide: An in vitro study.
| Autor: | Shruthi D; Department of Prosthodontics, SRM Dental College, Chennai, Tamil Nadu, India., Saravanan M, Reddy V, Balasubramanium M |
|---|---|
| Jazyk: | angličtina |
| Zdroj: | Journal of Indian Prosthodontic Society [J Indian Prosthodont Soc] 2024 Apr 01; Vol. 24 (2), pp. 196-200. Date of Electronic Publication: 2024 Apr 23. |
| DOI: | 10.4103/jips.jips_535_23 |
| Abstrakt: | Background: In-office three-dimensional (3D) printers and metal sleeveless surgical guides are becoming a major trend recently. However, metal sleeve-free designs are reported to be more prone to distortion which might lead to variation in the inner diameter of the drill hole and cause deviation and inaccuracy in the placement of the implant. Carbon fiber nanoparticles are reported to improve the properties of 3D printing resin material in industrial application. Aim: The purpose of the study is to evaluate and compare the wear resistance of 3D-printed implant guides with metal sleeve, sleeve-free, and reinforced sleeve-free resin to the guide drill. Materials and Methods: A total of 66 samples with 22 samples in each group. Three groups including 3D-printed surgical guide with metal sleeve (Group A), without metal sleeve (Group B), an carbon fiber reinforced without metal sleeve (Group C) were included in the study. All samples were evaluated before sequential drilling and after sequential drilling using Vision Measuring Machine. The data were tabulated and statistically evaluated. Results: The data obtained were statistically analyzed with one-way analysis of variance and posthoc test. The data obtained for wear observed in the samples showed that the wear was highest in Group B with a mean of 0.5036 ± 0.1118 and the least was observed in Group A with a mean of 0.0228 ± 0.0154 and Group C was almost similar to Group A with mean of 0.0710 ± 0.0381. The results showed there was a significant difference between Group B with Group A and C, respectively (P < 0.05). The results showed that there was no significant difference regarding the wear observed between Groups A and C (P > 0.05). Conclusion: The wear observed in the guide with a metal sleeve and carbon fiber reinforced without a metal sleeve was almost similar. The carbon fiber-reinforced guide showed better tolerance to guide drill equivalent to metal sleeve. Thus, carbon fiber nanoparticles reinforced in 3D printing resin have shown improved strength and can be used as a good replacement for a metal sleeve for an accurate placement of the implant. (Copyright © 2024 Copyright: © 2024 The Journal of Indian Prosthodontic Society.) |
| Databáze: | MEDLINE |
| Externí odkaz: |
|