Single missing molar with wide mesiodistal length restored using a single or double implant-supported crown: A self-controlled case report and 3D finite element analysis.

Autor:	Wong I; Hospital of Stomatology, Guanghua School of Stomatology, Sun Yat-sen University, Guangzhou, China.; Guangdong Provincial Key Laboratory of Stomatology, Guangzhou, China., Zhang Z; Hospital of Stomatology, Guanghua School of Stomatology, Sun Yat-sen University, Guangzhou, China.; Guangdong Provincial Key Laboratory of Stomatology, Guangzhou, China., Dang X; Guangdong Janus Biotechnology Co., Ltd., Guangzhou, China.; Guangdong CAS Angels Biotechnology Co., Ltd., Foshan, China., Yu X; Hospital of Stomatology, Guanghua School of Stomatology, Sun Yat-sen University, Guangzhou, China.; Guangdong Provincial Key Laboratory of Stomatology, Guangzhou, China., Lin X; Hospital of Stomatology, Guanghua School of Stomatology, Sun Yat-sen University, Guangzhou, China.; Guangdong Provincial Key Laboratory of Stomatology, Guangzhou, China., Li Y; Department of Stomatology, the Seventh Affiliated Hospital, Sun Yat-sen University, Shenzhen, China., Deng F; Hospital of Stomatology, Guanghua School of Stomatology, Sun Yat-sen University, Guangzhou, China.; Guangdong Provincial Key Laboratory of Stomatology, Guangzhou, China., Xu R; Hospital of Stomatology, Guanghua School of Stomatology, Sun Yat-sen University, Guangzhou, China.; Guangdong Provincial Key Laboratory of Stomatology, Guangzhou, China.
Jazyk:	angličtina
Zdroj:	Journal of prosthodontic research [J Prosthodont Res] 2024 Oct 16; Vol. 68 (4), pp. 658-666. Date of Electronic Publication: 2024 Apr 19.
DOI:	10.2186/jpr.JPR_D_23_00278
Abstrakt:	Purpose: Based on a self-controlled case, this study evaluated the finite element analysis (FEA) results of a single missing molar with wide mesiodistal length (MDL) restored by a single or double implant-supported crown. Methods: A case of a missing bilateral mandibular first molar with wide MDL was restored using a single or double implant-supported crown. The implant survival and peri-implant bone were compared. FEA was conducted in coordination with the case using eight models with different MDLs (12, 13, 14, and 15 mm). Von Mises stress was calculated in the FEA to evaluate the biomechanical responses of the implants under increasing vertical and lateral loading, including the stress values of the implant, abutment, screw, crown, and cortical bone. Results: The restorations on the left and right sides supported by double implants have been used for 6 and 12 years, respectively, and so far have shown excellent osseointegration radiographically.The von Mises stress calculated in the FEA showed that when the MDL was >14 mm, both the bone and prosthetic components bore more stress in the single implant-supported strategy. The strength was 188.62-201.37 MPa and 201.85-215.9 MPa when the MDL was 14 mm and 15 mm, respectively, which significantly exceeded the allowable yield stress (180 MPa). Conclusions: Compared with the single implant-supported crown, the double implant-supported crown reduced peri-implant bone stress and produced a more appropriate stress transfer model at the implant-bone interface when the MDL of the single missing molar was ≥14 mm.
Databáze:	MEDLINE
Externí odkaz:	Zobrazit plný text záznamu