| Autor: |
Cencen V; Laboratory for Bio-Nano Instrumentation, Interfaculty Bioengineering Institute, School of Engineering, Ecole Polytechnique Fédérale Lausanne., Ghadiani B; Laboratory for Bio-Nano Instrumentation, Interfaculty Bioengineering Institute, School of Engineering, Ecole Polytechnique Fédérale Lausanne., Andany SH; Laboratory for Bio-Nano Instrumentation, Interfaculty Bioengineering Institute, School of Engineering, Ecole Polytechnique Fédérale Lausanne., Kangül M; Laboratory for Bio-Nano Instrumentation, Interfaculty Bioengineering Institute, School of Engineering, Ecole Polytechnique Fédérale Lausanne., Tekin C; Programmable Biomaterials Laboratory, Institute of Materials, School of Engineering, Ecole Poly-technique Fédérale Lausanne., Penedo M; Laboratory for Bio-Nano Instrumentation, Interfaculty Bioengineering Institute, School of Engineering, Ecole Polytechnique Fédérale Lausanne., Bastings M; Programmable Biomaterials Laboratory, Institute of Materials, School of Engineering, Ecole Poly-technique Fédérale Lausanne., Fantner GE; Laboratory for Bio-Nano Instrumentation, Interfaculty Bioengineering Institute, School of Engineering, Ecole Polytechnique Fédérale Lausanne; georg.fantner@epfl.ch. |
| Abstrakt: |
High-speed atomic force microscopy (HS-AFM) is a popular molecular imaging technique for visualizing single-molecule biological processes in real-time due to its ability to image under physiological conditions in liquid environments. The photothermal off-resonance tapping (PORT) mode uses a drive laser to oscillate the cantilever in a controlled manner. This direct cantilever actuation is effective in the MHz range. Combined with operating the feedback loop on the time domain force curve rather than the resonant amplitude, PORT enables high-speed imaging at up to ten frames per second with direct control over tip-sample forces. PORT has been shown to enable imaging of delicate assembly dynamics and precise monitoring of patterns formed by biomolecules. Thus far, the technique has been used for a variety of dynamic in vitro studies, including the DNA 3-point-star motif assembly patterns shown in this work. Through a series of experiments, this protocol systematically identifies the optimal imaging parameter settings and ultimate limits of the HS-PORT AFM imaging system and how they affect biomolecular assembly processes. Additionally, it investigates potential undesired thermal effects induced by the drive laser on the sample and surrounding liquid, particularly when the scanning is limited to small areas. These findings provide valuable insights that will drive the advancement of PORT mode's application in studying complex biological systems. |
