| Autor: |
Drake AD; Department of Chemical and Materials Engineering, University of Kentucky, 177 F.P. Anderson Tower, Lexington, Kentucky 40506-0046, United States., He Y; Department of Chemical and Materials Engineering, University of Kentucky, 177 F.P. Anderson Tower, Lexington, Kentucky 40506-0046, United States., Ladipo F; Department of Chemistry, University of Kentucky, 125 Chemistry/Physics Building, Lexington, Kentucky 40506-0055, United States., Knutson BL; Department of Chemical and Materials Engineering, University of Kentucky, 177 F.P. Anderson Tower, Lexington, Kentucky 40506-0046, United States., Rankin SE; Department of Chemical and Materials Engineering, University of Kentucky, 177 F.P. Anderson Tower, Lexington, Kentucky 40506-0046, United States. |
| Abstrakt: |
The transport properties of the ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF 6 ]) confined within silica microparticles with well-ordered, accessible mesopores (5.4 or 9 nm diameter) were investigated. [BMIM][PF 6 ] confinement was confirmed by using differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) spectroscopy. The transport properties of the confined IL were studied using the neutral and cationic fluorescent probes 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4 H -pyran (DCM) and rhodamine 6G, respectively, through fluorescence recovery after photobleaching (FRAP) in confocal microscopy. The diffusivity of DCM in 9 nm pores is 0.026 ± 0.0091 μm 2 /s, which is 2 orders of magnitude less than in the bulk ionic liquid. The pore size did not affect the diffusivity of DCM in unmodified silica nanopores. The diffusivity of the cationic probe is reduced by 63% relative to that of the neutral probe. Diffusivity is increased with water content, where equilibrium hydration of the system leads to a 37% increase in DCM diffusivity. The most dramatic impact on diffusivity was caused by tethering an IL-like methylimidazolium chloride group to the pores, which increased the pore hydrophobicity and resulted in 3-fold higher diffusivity of DCM compared to bare silica pores. Subsequent exchange of the chloride anion from the tethering group with PF 6 - decreased the diffusivity to half that of bare silica. The diffusion of probe molecules is affected most strongly by the pore wall effects on probe interactions rather than by the pore size itself, which suggests that understanding pore wall diffusion is critical to the design of nanoconfined ILs for separations, catalysis, and energy storage. |
