Effect of thickness and shade of CAD/CAM composite on the light transmission from different light-curing units.

Autor: Mazão JD; Universidade Federal de Uberlânida - UFU, School of Dentistry, Operative Dentistry and Dental Materials Department, Uberlândia, MG, Brazil., Ribeiro MTH; Universidade Federal de Uberlânida - UFU, School of Dentistry, Operative Dentistry and Dental Materials Department, Uberlândia, MG, Brazil., Braga SSL; Universidade Federal de Uberlânida - UFU, School of Dentistry, Operative Dentistry and Dental Materials Department, Uberlândia, MG, Brazil., Zancopé K; Universidade Federal de Uberlânida - UFU, School of Dentistry, Department of Occlusion, Fixed Prosthodontic and Dental Materials, School of Dentistry, Federal University of Uberlândia, MG, Brazil., Price RB; Dalhousie University, Department of Dental Clinical Sciences, Halifax, Nova Scotia, Canada., Soares CJ; Universidade Federal de Uberlânida - UFU, School of Dentistry, Operative Dentistry and Dental Materials Department, Uberlândia, MG, Brazil.
Jazyk: angličtina
Zdroj: Brazilian oral research [Braz Oral Res] 2023 Nov 10; Vol. 37, pp. e114. Date of Electronic Publication: 2023 Nov 10 (Print Publication: 2023).
DOI: 10.1590/1807-3107bor-2023.vol37.0114
Abstrakt: The thickness and shade of a restoration will affect the transmission of light from the light-curing unit (LCU). This study determined the power (mW), spectral radiant power (mW/nm), and beam profile of different LCUs through various thicknesses and shades of a CAD-CAM resin composite (BRAVA Block, FGM). Five thicknesses: 0.5; 0.75; 1.0; 1.5, and 2.0 mm, in three shades: Bleach; A2 and A3.5 of a CAD-CAM resin (n = 5). Two single-peak LCUs: EL, Elipar DeepCure-S (3M Oral Care); and OP, Optilight Max (Gnatus), and one multiple-peak LCU: VL, VALO Grand (Ultradent), were used. The LCUs were positioned touching the surface of the BRAVA Block. The power and emission spectrum were measured using a fiberoptic spectrometer attached to an integrating sphere, and the beam profiles using a laser beam profiler. The effect of the material thickness on the light attenuation coefficients was determined. VL and EL delivered more homogeneous beam profiles than OP. The type of the BRAVA Block had a significant effect on the transmitted power, and wavelengths of transmitted light (p < 0.001). There was an exponential reduction in the power and emission spectrum as the thickness of the BRAVA Block increased (p < 0.001). The light transmission through the A2 shade was least affected by the thickness (p < 0.001). The attenuation coefficient was higher for the violet light and higher for A3.5 than the A2 or Bleach shades. No violet light from the VL could be detected at the bottom of 2.0 mm of the BRAVA Block.
Databáze: MEDLINE