| Autor: |
Junger C; Group for Quality Assurance and Industrial Image Processing, Technische Universität Ilmenau, 98693 Ilmenau, Germany., Speck H; Fraunhofer Institute for Applied Optics and Precision Engineering IOF Jena, 07745 Jena, Germany., Landmann M; Fraunhofer Institute for Applied Optics and Precision Engineering IOF Jena, 07745 Jena, Germany., Srokos K; Fraunhofer Institute for Applied Optics and Precision Engineering IOF Jena, 07745 Jena, Germany., Notni G; Group for Quality Assurance and Industrial Image Processing, Technische Universität Ilmenau, 98693 Ilmenau, Germany.; Fraunhofer Institute for Applied Optics and Precision Engineering IOF Jena, 07745 Jena, Germany. |
| Jazyk: |
angličtina |
| Zdroj: |
Sensors (Basel, Switzerland) [Sensors (Basel)] 2023 Oct 18; Vol. 23 (20). Date of Electronic Publication: 2023 Oct 18. |
| DOI: |
10.3390/s23208567 |
| Abstrakt: |
Estimating depth from images is a common technique in 3D perception. However, dealing with non-Lambertian materials, e.g., transparent or specular, is still nowadays an open challenge. However, to overcome this challenge with deep stereo matching networks or monocular depth estimation, data sets with non-Lambertian objects are mandatory. Currently, only few real-world data sets are available. This is due to the high effort and time-consuming process of generating these data sets with ground truth. Currently, transparent objects must be prepared, e.g., painted or powdered, or an opaque twin of the non-Lambertian object is needed. This makes data acquisition very time consuming and elaborate. We present a new measurement principle for how to generate a real data set of transparent and specular surfaces without object preparation techniques, which greatly reduces the effort and time required for data collection. For this purpose, we use a thermal 3D sensor as a reference system, which allows the 3D detection of transparent and reflective surfaces without object preparation. In addition, we publish the first-ever real stereo data set, called TranSpec3D, where ground truth disparities without object preparation were generated using this measurement principle. The data set contains 110 objects and consists of 148 scenes, each taken in different lighting environments, which increases the size of the data set and creates different reflections on the surface. We also show the advantages and disadvantages of our measurement principle and data set compared to the Booster data set (generated with object preparation), as well as the current limitations of our novel method. |
| Databáze: |
MEDLINE |
| Externí odkaz: |
|
|
Nepřihlášeným uživatelům se plný text nezobrazuje |
K zobrazení výsledku je třeba se přihlásit.
|
