Influence of laser intensity and BaTiO 3 content on the surface properties of 3YSZ.

Autor: Majidian H; Department of Ceramic, Materials and Energy Research Center, Karaj, Iran. h-majidian@merc.ac.ir., Ghalandarzadeh A; School of Metallurgy and Materials Engineering, Iran University of Science and Technology, Tehran, Iran., Kaboosi M; School of Metallurgy and Materials Engineering, Iran University of Science and Technology, Tehran, Iran., Nikzad L; Department of Ceramic, Materials and Energy Research Center, Karaj, Iran., Ganjali M; Department of Nanotechnology and Advanced Materials, Materials and Energy Research Center, Karaj, Iran.
Jazyk: angličtina
Zdroj: Odontology [Odontology] 2024 Apr; Vol. 112 (2), pp. 408-427. Date of Electronic Publication: 2023 Oct 04.
DOI: 10.1007/s10266-023-00853-6
Abstrakt: Zirconia-based dental implants are in direct contact with living tissues and any improvements in their bioactivity and adhesion to the tissues are highly welcome. In this study, different ratios of barium titanate (BT) were added to 3 mol% yttria-stabilized zirconia (3YSZ) through conventional sintering. The laser-texturing technique was also conducted to improve the biological performance of 3YSZ ceramics. The composition and the surface of the prepared composites were characterized by X-ray diffraction and scanning electron microscopy (SEM), respectively. The roughness and surface wettability of the composites were also measured. Furthermore, MC3T3-E1 pre-osteoblast cells were used for the in vitro experiments. Cell viability was evaluated using a commercial resazurin-based method. Morphology and cellular adhesion were observed using SEM. Based on the results, the laser texturing and the barium titanate content influenced the surface characteristics of the prepared composites. The laser-textured 3YSZ/7 mol% BT composites showed a lower water contact angle compared to the other samples, which indicated superior surface hydrophilicity. The cell viability and cell adhesion of 3YSZ/BT composites increased with the rise in the barium titanate content and laser power. An elongated cell morphology and apatite nucleation were also observed by the BT content. Overall, the laser-treated 3YSZ/5 and 7 mol% BT composites may be promising candidates in hard tissue repair due to their good cell response.
(© 2023. The Author(s), under exclusive licence to The Society of The Nippon Dental University.)
Databáze: MEDLINE
Externí odkaz: