Do locking plugs improve implant strength? Biomechanical comparison of polyaxial locking constructs with and without locking plugs in a fracture gap model.

Autor: Viitanen J; Veterinary Specialists Scotland, part of Linnaeus veterinary limited, Livingston, EH54 8AG, United Kingdom. joni.viitanen@gmail.com., Quinn R; Anderson Moores Veterinary Specialists, part of Linnaeus veterinary limited, Hampshire, S021 2LL, United Kingdom., Allen M; Department of Veterinary Medicine, Surgical Discovery Centrum, University of Cambridge, Cambridge, CB3 0ES, United Kingdom., Broeckx BJG; Department of Nutrition, Genetics and Ethology, Faculty of Veterinary Medicine, Ghent University, 9820, Merelbeke, Belgium., Bartkowiak T; Institute of Mechanical Technology, Poznan University of Technology, 60-965, Poznań, Poland., Haimel G; Tierarztpraxis Am Stadtpark, Reisnerstrasse7, 1030, Vienna, Austria.
Jazyk: angličtina
Zdroj: BMC veterinary research [BMC Vet Res] 2023 Aug 02; Vol. 19 (1), pp. 104. Date of Electronic Publication: 2023 Aug 02.
DOI: 10.1186/s12917-023-03660-x
Abstrakt: Background: The objective of this study was to investigate the effects of locking plugs and the biomechanical properties of a 3.5 mm 8-hole polyaxial locking plate in a fracture gap model. Our hypothesis was that locking plugs would increase the strength and stiffness of the construct. Twelve 3.5 mm 8-hole plates were used to evaluate two different construct designs (with locking plugs vs. without locking plugs) with validated bone substitutes in a 25 mm bridging osteosynthesis gap model. Each construct was subjected to a single cycle four-point bending load to failure using a servo-hydraulic testing machine. Bending stiffness, bending strength, and bending structural stiffness were calculated and compared using an unpaired Student´s t-test.
Results: The plating construct with locking plugs did not show any significant increase in terms of bending stiffness, bending strength, and bending structural stiffness compared to plating construct without locking plugs in a 25 mm gap fracture model during a single cycle four-point bending.
Conclusions: Under the conditions tested, filling empty plate holes with locking plugs in bridging osteosynthesis does not increase stiffness or strength of the plate-bone construct.
(© 2023. The Author(s).)
Databáze: MEDLINE
Externí odkaz:
Nepřihlášeným uživatelům se plný text nezobrazuje