| Autor: |
Lubura J; Faculty of Technology Novi Sad, University of Novi Sad, Bulevar cara Lazara 1, 21 000 Novi Sad, Serbia., Kojić P; Faculty of Technology Novi Sad, University of Novi Sad, Bulevar cara Lazara 1, 21 000 Novi Sad, Serbia., Pavličević J; Faculty of Technology Novi Sad, University of Novi Sad, Bulevar cara Lazara 1, 21 000 Novi Sad, Serbia., Ikonić B; Faculty of Technology Novi Sad, University of Novi Sad, Bulevar cara Lazara 1, 21 000 Novi Sad, Serbia., Balaban D; Faculty of Technology Novi Sad, University of Novi Sad, Bulevar cara Lazara 1, 21 000 Novi Sad, Serbia., Bera O; Faculty of Technology Novi Sad, University of Novi Sad, Bulevar cara Lazara 1, 21 000 Novi Sad, Serbia. |
| Abstrakt: |
The kinetic model, encompassing the curing and reversion phenomena of the NR/SBR rubber vulcanization process, was developed by means of the finite element method simultaneously with heat transfer equations, including heat generation due to curing reactions. The vulcanization simulation was conducted for three spheres of different diameters (1, 5 and 10 cm) and two rubber wheels, one of which was a commercial product of the rubber industry. The proposed advanced simulation model, based on products' two-dimensional axisymmetry, includes cooling after vulcanization, during which the crosslinking reactions continue to take place as a result of the products' heated interiors. As a criterion for removing the product from the mold, an average vulcanization degree of 0.9 was set, whereby, during cooling, the vulcanization degree increases, due to crosslinking reactions. Based on the minimal difference between the maximal and minimal vulcanization degrees, which did not exceed a value of 0.0142, the optimal process parameters for each product were determined, achieving homogeneity and obtaining high-quality rubber products, while simultaneously ensuring a more efficient vulcanization process and enhanced cost effectiveness for the rubber industry. |
