Evaluation of the stability of heavy metal-containing sediments obtained in the wastewater treatment processes with the use of various precipitating agents.

Autor: Lejwoda P; Department of Environmental Monitoring, Central Mining Institute in Katowice, Plac Gwarków 1, Katowice, Poland. plejwoda@gig.eu., Świnder H; Department of Environmental Monitoring, Central Mining Institute in Katowice, Plac Gwarków 1, Katowice, Poland., Thomas M; Faculty of Environmental Engineering and Energy, Cracow University of Technology, Kraków, 31-155, Warszawska 24, Poland.
Jazyk: angličtina
Zdroj: Environmental monitoring and assessment [Environ Monit Assess] 2023 Mar 04; Vol. 195 (4), pp. 442. Date of Electronic Publication: 2023 Mar 04.
DOI: 10.1007/s10661-023-11036-9
Abstrakt: The article presents the results of research on the leachability of selected heavy metals (cadmium, nickel, chromium, cobalt, lead, and copper) from solid waste obtained in laboratory processes involved in the industrial treatment of wastewater generated in metal surface treatment plants. The test sludges were precipitated using sodium hydroxide solution, calcium hydroxide suspension, 45% solution sodium trithiocarbonate (Na 2 CS 3 ), 15% solution trimercapto-s-triazine, sodium salt (TMT), and 40% solution sodium dimethyldithiocarbamate (DMDTC). The precipitates were treated with artificial acid rain and artificial salt water. After 1, 7, 14, and 21 days of leaching, the concentration of Cd, Co, Cr, Cu, Pb, and Ni in the leachate was determined. Artificial acid rain leached Ni and Cd to a maximum concentration of 724 mg/L and 1821 mg/L, respectively, from the sludge obtained after the application of Na 2 CS 3 , while artificial salt water leached Ni in the maximum amount of 466 mg/L and Cd-max. 1320 mg/L. When Ca(OH) 2 /NaOH was used, the leaching of Cr reached a similar level for both leaching agents, i.e., the maximum for artificial acid rain was 72.2 mg/L and the maximum for artificial salt water 71.8 mg/L. The use of Na 2 CS 3 or Ca(OH) 2 /NaOH poses a risk of some heavy metals entering the environment, which may have a negative impact on living organisms, whereas the sludges obtained with the use of DMDTC and TMT as precipitants were the most stable under the experimental conditions and did not pose a potential environmental hazard.
(© 2023. The Author(s).)
Databáze: MEDLINE
Externí odkaz: