Highly Selective Room Temperature Detection of NH 3 and NO x Using Oxygen-Deficient W 18 O 49 -Supported WS 2 Heterojunctions.

Autor: Manoharan M; Advanced Materials and Devices Laboratory, Department of Nanoscience and Technology, Bharathiar University, Coimbatore, Tamil Nadu641046, India., Govindharaj K; Advanced Materials and Devices Laboratory, Department of Nanoscience and Technology, Bharathiar University, Coimbatore, Tamil Nadu641046, India., Muthumalai K; Advanced Materials and Devices Laboratory, Department of Nanoscience and Technology, Bharathiar University, Coimbatore, Tamil Nadu641046, India., Pandian R; Surface and Sensors Studies Division, Materials Science Group, Indira Gandhi Centre for Atomic Research, Kalpakkam, Tamil Nadu603102, India., Haldorai Y; Advanced Materials and Devices Laboratory, Department of Nanoscience and Technology, Bharathiar University, Coimbatore, Tamil Nadu641046, India., Rajendra Kumar RT; Advanced Materials and Devices Laboratory, Department of Nanoscience and Technology, Bharathiar University, Coimbatore, Tamil Nadu641046, India.
Jazyk: angličtina
Zdroj: ACS applied materials & interfaces [ACS Appl Mater Interfaces] 2023 Jan 25; Vol. 15 (3), pp. 4703-4712. Date of Electronic Publication: 2023 Jan 13.
DOI: 10.1021/acsami.2c18732
Abstrakt: In this paper, we reported the controlled synthesis of tungsten disulfide/reduced tungsten oxide (WS 2 /W 18 O 49 ) heterojunctions for highly efficient room temperature NO x and ammonia (NH 3 ) sensors. X-ray diffraction analysis revealed the formation of the oxygen-deficient W 18 O 49 phase along with WS 2 . Field-emission scanning electron microscopy and transmission electron microscopy displayed the formation of WS 2 flakes over W 18 O 49 nanorods. X-ray photoelectron spectroscopy showed the presence of tungsten in W 4+ , W 5+ , and W 6+ oxidation states corresponding to WS 2 and W 18 O 49 , respectively. The WS 2 /W 18 O 49 heterojunction sensor exhibited sub-ppm level sensitivity to NO x and NH 3 at room temperature. The heterojunction sensor detected 0.6 ppm NO x and 0.5 ppm NH 3 , with a corresponding response of 7.1 and 3.8%, respectively. The limit of detection of the sensor was calculated to be 0.05 and 0.17 ppm for NH 3 and NO x , respectively. The cyclic stability test showed that the sensor exhibited high stability even after 24 cycles for the detection of NH 3 and 14 cycles for NO x . Compared to pristine WO 3 and WS 2 , the WS 2 /W 18 O 49 heterojunction showed high selectivity toward NO x and NH 3 . The results could be useful for the development of room temperature NO x and NH 3 sensors.
Databáze: MEDLINE