| Autor: |
Selim A; Research Centre for Natural Sciences, Renewable Energy Group, Institute of Materials and Environmental Chemistry, Magyar Tudósok Körútja 2, H-1117 Budapest, Hungary.; National Research Centre, Chemical Engineering and Pilot Plat Department, Engineering and Renewable Energy Research Institute, 33 El Bohouth Street, Giza 12622, Egypt., Szijjártó GP; Research Centre for Natural Sciences, Renewable Energy Group, Institute of Materials and Environmental Chemistry, Magyar Tudósok Körútja 2, H-1117 Budapest, Hungary., Románszki L; Research Centre for Natural Sciences, Functional Interfaces Research Group, Institute of Materials and Environmental Chemistry, Magyar Tudósok Körútja 2, H-1117 Budapest, Hungary., Tompos A; Research Centre for Natural Sciences, Renewable Energy Group, Institute of Materials and Environmental Chemistry, Magyar Tudósok Körútja 2, H-1117 Budapest, Hungary. |
| Abstrakt: |
The proton exchange membrane (PEM) represents a pivotal material and a key challenge in developing fuel cell science and hydrogen technology. Nafion is the most promising polymer which will lead to its commercialisation. Hybrid membranes of nanosized tungsten oxide (WO 3 ) and Nafion were fabricated, characterised, and tested in a single cell. The incorporation of 10 wt% WO 3 resulted in 21% higher water uptake, 11.7% lower swelling ratio, almost doubling the hydration degree, and 13% higher mechanical stability of the hybrid membrane compared to the Nafion XL. Compared to commercial Nafion XL, the rNF-WO-10 hybrid membrane showed an 8.8% and 20% increase in current density of the cell at 0.4 V operating at 80 and 95 °C with 1.89 and 2.29 A/cm 2 , respectively. The maximum power density has increased by 9% (0.76 W/cm 2 ) and 19.9% (0.922 W/cm 2 ) when operating at the same temperatures compared to the commercial Nafion XL membrane. Generally, considering the particular structure of Nafion XL, our Nafion-based membrane with 10 wt% WO 3 (rNF-WO-10) is a suitable PEM with a comparable performance at different operating conditions. |
