Understanding the "Anti-Catalyst" Effect with Added CoO x Water Oxidation Catalyst in Dye-Sensitized Photoelectrolysis Cells: Carbon Impurities in Nanostructured SnO 2 Are the Culprit.

Autor: Jewell CF; Department of Chemistry, Colorado State University, Fort Collins, Colorado 80523, United States., Subramanian A; Department of Materials Science and Chemical Engineering, Stony Brook University, Stony Brook, New York 11794, United States., Nam CY; Center for Functional Nanomaterials, Brookhaven National Laboratory, Upton, New York, New York 11973, United States.; Department of Materials Science and Chemical Engineering, Stony Brook University, Stony Brook, New York 11794, United States., Finke RG; Department of Chemistry, Colorado State University, Fort Collins, Colorado 80523, United States.
Jazyk: angličtina
Zdroj: ACS applied materials & interfaces [ACS Appl Mater Interfaces] 2022 Jun 08; Vol. 14 (22), pp. 25326-25336. Date of Electronic Publication: 2022 May 25.
DOI: 10.1021/acsami.2c02692
Abstrakt: In 2017, we reported a dye-sensitized, photoelectrolysis cell consisting of fluorine-doped tin oxide (FTO)-coated glass covered by SnO 2 nanoparticles coated with N , N '-bis(phosphonomethyl)-3,4,9,10-perylenediimide (PMPDI) dye and then a photoelectrochemically deposited CoO x water oxidation catalyst (WOCatalyst), FTO/nano-SnO 2 /PMPDI/CoO x . This system employed nanostructured SnO 2 stabilized by a polyethyleneglycol bisphenol A epichlorohydrin (PEG-BAE) copolymer and other C-containing additives based on a literature synthesis to achieve a higher surface area and thus greater PMPDI dye absorption and resultant light collection. Surprisingly, the addition of the well-established WOCatalyst CoO x resulted in a decrease in the photocurrent, an unexpected "anti-catalyst" effect . Two primary questions addressed in the present study are (1) what is the source of this "anti-catalyst" effect? and (2) are the findings of broader interest? Reflection on the synthesis of nano-SnO 2 stabilized by PEG-BAE, and the large, ca. 10:1 ratio of C to Sn in synthesis, led to the hypothesis that even the annealing step at 450 °C in of the FTO/SnO 2 anode precursors was unlikely to remove all the carbon initially present. Indeed, residual carbon impurities are shown to be the culprit in the presently observed "anti-catalyst" effect. The implication and anticipated broader impact of the results of answering the two abovementioned questions are also presented and discussed along with a section entitled "Perspective and Suggestions for the Field Going Forward."
Databáze: MEDLINE