| Autor: |
Pham DQ; ARC Training Centre for Surface Engineering for Advanced Materials (SEAM), Department of Mechanical Engineering & Product Design Engineering, School of Engineering, Swinburne University of Technology, Hawthorn, VIC 3122, Australia., Gangadoo S; School of Science, STEM College, RMIT University, Melbourne, VIC 3000, Australia., Berndt CC; ARC Training Centre for Surface Engineering for Advanced Materials (SEAM), Department of Mechanical Engineering & Product Design Engineering, School of Engineering, Swinburne University of Technology, Hawthorn, VIC 3122, Australia., Chapman J; School of Science, STEM College, RMIT University, Melbourne, VIC 3000, Australia., Zhai J; School of Science, STEM College, RMIT University, Melbourne, VIC 3000, Australia., Vasilev K; College of Medicine and Public Health, Flinders University, Bedford Park, SA 5042, Australia., Truong VK; College of Medicine and Public Health, Flinders University, Bedford Park, SA 5042, Australia., Ang ASM; ARC Training Centre for Surface Engineering for Advanced Materials (SEAM), Department of Mechanical Engineering & Product Design Engineering, School of Engineering, Swinburne University of Technology, Hawthorn, VIC 3122, Australia. |
| Abstrakt: |
Hydroxyapatite (HAp)-coated metallic implants are known for their excellent bioactivity and osteoconductivity. However, infections associated with the microstructure of the HAp coatings may lead to implant failures as well as increased morbidity and mortality. This work addresses the concerns about infections by developing novel composite coatings of HAp and gallium liquid metal (GaLM) using atmospheric plasma spray (APS) as the coating technique. Five weight percent Ga was mixed into a commercially supplied HAp powder using an orbital shaker; then, the HAp-Ga particle feedstock was coated onto Ti 6 Al 4 V substrates using the APS technique. The X-ray diffraction results indicated that Ga did not form any Ga-related phases in either the HAp-Ga powder or the respective coating. The GaLM filled the pores of the HAp coating presented both on the top surface and within the coating, especially at voids and cracks, to prevent failures of the coating at these locations. The wettability of the surface was changed from hydrophobic for the HAp coating to hydrophilic for the HAp-Ga composite coating. Finally, the HAp-Ga coating presented excellent antibacterial efficacies against both initial attachments and established biofilms generated from methicillin-resistant Staphylococcus aureus and Pseudomonas aeruginosa after 18 h and 7 days of incubation in comparison to the control HAp coating. This study shows that GaLM improves the antibacterial properties of HAp-based coatings without sacrificing the beneficial properties of conventional HAp coatings. Thus, the HAp-Ga APS coating is a viable candidate for antibacterial coatings. |
