Biocompatible Customized 3D Bone Scaffolds Treated with CRFP, an Osteogenic Peptide.

Autor: Mustahsan VM; Department of Anesthesiology, Stony Brook University, Stony Brook, NY 11794, USA.; Department of Mechanical Engineering, Stony Brook University, Stony Brook, NY 11794, USA., Anugu A; Department of Anesthesiology, Stony Brook University, Stony Brook, NY 11794, USA., Komatsu DE; Department of Orthopedics, Stony Brook University, Stony Brook, NY 11794, USA., Kao I; Department of Mechanical Engineering, Stony Brook University, Stony Brook, NY 11794, USA., Pentyala S; Department of Anesthesiology, Stony Brook University, Stony Brook, NY 11794, USA.; Department of Mechanical Engineering, Stony Brook University, Stony Brook, NY 11794, USA.; Department of Orthopedics, Stony Brook University, Stony Brook, NY 11794, USA.
Jazyk: angličtina
Zdroj: Bioengineering (Basel, Switzerland) [Bioengineering (Basel)] 2021 Nov 30; Vol. 8 (12). Date of Electronic Publication: 2021 Nov 30.
DOI: 10.3390/bioengineering8120199
Abstrakt: Background: Currently used synthetic bone graft substitutes (BGS) are either too weak to bear the principal load or if metallic, they can support loading, but can lead to stress shielding and are unable to integrate fully. In this study, we developed biocompatible, 3D printed scaffolds derived from µCT images of the bone that can overcome these issues and support the growth of osteoblasts.
Methods: Cylindrical scaffolds were fabricated with acrylonitrile butadiene styrene (ABS) and Stratasys ® MED 610 (MED610) materials. The 3D-printed scaffolds were seeded with Mus musculus calvaria cells (MC3T3). After the cells attained confluence, osteogenesis was induced with and without the addition of calcitonin receptor fragment peptide (CRFP) and the bone matrix production was analyzed. Mechanical compression testing was carried out to measure compressive strength, stiffness, and elastic modulus.
Results: For the ABS scaffolds, there was a 9.8% increase in compressive strength ( p < 0.05) in the scaffolds with no pre-coating and the treatment with CRFP, compared to non-treated scaffolds. Similarly, MED610 scaffolds treated with CRFP showed an 11.9% (polylysine pre-coating) and a 20% (no pre-coating) increase ( p < 0.01) in compressive strength compared to non-treated scaffolds.
Conclusions: MED610 scaffolds are excellent BGS as they support osteoblast growth and show enhanced bone growth with enhanced compressive strength when augmented with CRFP.
Databáze: MEDLINE
Externí odkaz: