Autor: |
Huang W; Department of Chemical Engineering, Stanford University, Stanford, CA 94305, USA., Johnston-Peck AC; Material Measurement Laboratory, National Institute of Standards and Technology, Gaithersburg, MD 20899, USA., Wolter T; Department of Chemical and Biological Engineering, University of Wisconsin-Madison, Madison, WI 53706, USA., Yang WD; Physical Measurement Laboratory, National Institute of Standards and Technology, Gaithersburg, MD 20899, USA., Xu L; Department of Chemical and Biological Engineering, University of Wisconsin-Madison, Madison, WI 53706, USA., Oh J; Department of Materials Science and Engineering, Stanford University, Stanford, CA 94305, USA., Reeves BA; Department of Chemical Engineering, Stanford University, Stanford, CA 94305, USA., Zhou C; Department of Chemical Engineering, Stanford University, Stanford, CA 94305, USA., Holtz ME; Material Measurement Laboratory, National Institute of Standards and Technology, Gaithersburg, MD 20899, USA., Herzing AA; Material Measurement Laboratory, National Institute of Standards and Technology, Gaithersburg, MD 20899, USA., Lindenberg AM; Department of Materials Science and Engineering, Stanford University, Stanford, CA 94305, USA.; Stanford Institute for Materials and Energy Sciences, SLAC National Accelerator Laboratory, Menlo Park, CA 94025, USA., Mavrikakis M; Department of Chemical and Biological Engineering, University of Wisconsin-Madison, Madison, WI 53706, USA., Cargnello M; Department of Chemical Engineering, Stanford University, Stanford, CA 94305, USA.; SUNCAT Center for Interface Science and Catalysis, SLAC National Accelerator Laboratory, Menlo Park, CA 94025, USA. |