Heat dissipation in Sm 3+ and Zn 2+ co-substituted magnetite (Zn 0.1 Sm x Fe 2.9-x O 4 ) nanoparticles coated with citric acid and pluronic F127 for hyperthermia application.

Autor: Shatooti S; Faculty of Physics, University of Isfahan, 81746-73441, Isfahan, Iran.; Institute of Physics, University of Freiburg, Hermann-Herder-Straße 3, 79104, Freiburg, Germany., Mozaffari M; Faculty of Physics, University of Isfahan, 81746-73441, Isfahan, Iran. mozafari@sci.ui.ac.ir., Reiter G; Institute of Physics, University of Freiburg, Hermann-Herder-Straße 3, 79104, Freiburg, Germany., Zahn D; Institute of Biomedical Engineering and Informatics (BMTI), Technische Universität Ilmenau, Gustav-Kirchhoff-Straße 2, 98693, Ilmenau, Germany., Dutz S; Institute of Biomedical Engineering and Informatics (BMTI), Technische Universität Ilmenau, Gustav-Kirchhoff-Straße 2, 98693, Ilmenau, Germany.
Jazyk: angličtina
Zdroj: Scientific reports [Sci Rep] 2021 Aug 18; Vol. 11 (1), pp. 16795. Date of Electronic Publication: 2021 Aug 18.
DOI: 10.1038/s41598-021-96238-2
Abstrakt: In this work, Sm 3+ and Zn 2+ co-substituted magnetite Zn 0.1 Sm x Fe 2.9-x O 4 (x = 0.0, 0.01, 0.02, 0.03, 0.04 and 0.05) nanoparticles, have been prepared via co-precipitation method and were electrostatically and sterically stabilized by citric acid and pluronic F127 coatings. The coated nanoparticles were well dispersed in an aqueous solution (pH 5.5). Magnetic and structural properties of the nanoparticles and their ferrofluids were studied by different methods. XRD studies illustrated that all as-prepared nanoparticles have a single phase spinel structure, with lattice constants affected by samarium cations substitution. The temperature dependence of the magnetization showed that Curie temperatures of the uncoated samples monotonically increased from 430 to 480 °C as Sm 3+ content increased, due to increase in A-B super-exchange interactions. Room temperature magnetic measurements exhibited a decrease in saturation magnetization of the uncoated samples from 98.8 to 71.9 emu/g as the Sm 3+ content increased, which is attributed to substitution of Sm 3+ (1.5 µB) ions for Fe 3+ (5 µB) ones in B sublattices. FTIR spectra confirmed that Sm 3+ substituted Zn 0.1 Sm x Fe 2.9-x O 4 nanoparticles were coated with both citric acid and pluronic F127 properly. The mean particle size of the coated nanoparticles was 40 nm. Calorimetric measurements showed that the maximum SLP and ILP values obtained for Sm 3+ substituted nanoparticles were 259 W/g and 3.49 nHm 2 /kg (1.08 mg/ml, measured at f = 290 kHz and H = 16kA/m), respectively, that are related to the sample with x = 0.01. Magnetic measurements revealed coercivity, which indicated that hysteresis loss may represent a substantial portion in heat generation. Our results show that these ferrofluids are potential candidates for magnetic hyperthermia applications.
(© 2021. The Author(s).)
Databáze: MEDLINE
Externí odkaz:
Nepřihlášeným uživatelům se plný text nezobrazuje