| Autor: |
Sahlstrom T, Pulkkinen A, Leskinen J, Tarvainen T |
| Jazyk: |
angličtina |
| Zdroj: |
IEEE transactions on ultrasonics, ferroelectrics, and frequency control [IEEE Trans Ultrason Ferroelectr Freq Control] 2021 Jun; Vol. 68 (6), pp. 2172-2182. Date of Electronic Publication: 2021 May 25. |
| DOI: |
10.1109/TUFFC.2021.3060175 |
| Abstrakt: |
Photoacoustic tomography (PAT) is an imaging modality that utilizes the photoacoustic effect. In PAT, a photoacoustic image is computed from measured data by modeling ultrasound propagation in the imaged domain and solving an inverse problem utilizing a discrete forward operator. However, in realistic measurement geometries with several ultrasound transducers and relatively large imaging volume, an explicit formation and use of the forward operator can be computationally prohibitively expensive. In this work, we propose a transformation-based approach for efficient modeling of photoacoustic signals and reconstruction of photoacoustic images. In the approach, the forward operator is constructed for a reference ultrasound transducer and expanded into a general measurement geometry using transformations that map the formulated forward operator in local coordinates to the global coordinates of the measurement geometry. The inverse problem is solved using a Bayesian framework. The approach is evaluated with numerical simulations and experimental data. The results show that the proposed approach produces accurate 3-D photoacoustic images with a significantly reduced computational cost both in memory requirements and time. In the studied cases, depending on the computational factors, such as discretization, over the 30-fold reduction in memory consumption was achieved without a reduction in image quality compared to a conventional approach. |
| Databáze: |
MEDLINE |
| Externí odkaz: |
|
