Autor: |
Guimarães NR; Hydraulic and Environmental Engineering Department, Polytechnic School of University of São Paulo, São Paulo, São Paulo, Brazil., Dörr F; Department of Clinical and Toxicological Analyses, School of Pharmaceutical Sciences, University of São Paulo, São Paulo, São Paulo, Brazil., Marques RO; Hydraulic and Environmental Engineering Department, Polytechnic School of University of São Paulo, São Paulo, São Paulo, Brazil., Pinto E; Department of Clinical and Toxicological Analyses, School of Pharmaceutical Sciences, University of São Paulo, São Paulo, São Paulo, Brazil.; Centre for Nuclear Energy in Agriculture, University of São Paulo, Piracicaba, São Paulo, Brazil., Ferreira Filho SS; Hydraulic and Environmental Engineering Department, Polytechnic School of University of São Paulo, São Paulo, São Paulo, Brazil. |
Abstrakt: |
Wastewater reuse has been widely discussed as an essential strategy to minimize the consumption of drinking water for less noble purposes. During biological wastewater treatment, organic matter is converted into a complex matrix containing a variety of soluble organic compounds. The objective of the present study was to evaluate the removal efficiency of the residual organic load in the final effluent from wastewater treatment plant with a conventional activated sludge process by different coagulants and parameters of coagulation-flocculation process, using dissolved organic carbon (DOC) concentration, molecular weight (MW) size distribution by size exclusion chromatography (SEC) coupled to mass spectrometry (MS), and zeta potential (ZP) analyses. The results showed a DOC removal efficiency up to 45% with iron chloride, and of 38% for aluminum sulfate and 31% for PAC coagulants. ZP was also measured during the procedures and authors conclude that the ZP also does not have a determining role in these removals. SEC and MS assessment was able to detect changes on secondary effluent molecular weight distribution profile after effluent coagulation-flocculation, this technique might be a promising tool to understand the composition of effluent organic matter and be helpful to estimate and optimize the performance of wastewater effluents treatment processes. |