| Autor: |
Collick BD; Department of Radiology, University of Wisconsin, Madison, WI 53705, United States of America. Author B D Collick and author B Behzadnezhad contributed equally to this work., Behzadnezhad B, Hurley SA, Mathew NK, Behdad N, Lindsay SA, Robb F, Stormont RS, McMillan AB |
| Jazyk: |
angličtina |
| Zdroj: |
Physics in medicine and biology [Phys Med Biol] 2020 Sep 24; Vol. 65 (19), pp. 19NT01. Date of Electronic Publication: 2020 Sep 24. |
| DOI: |
10.1088/1361-6560/abaffb |
| Abstrakt: |
Over the last 30 years, there have been dramatic changes in phased array coil technology leading to increasing channel density and parallel imaging functionality. Current receiver array coils are rigid and often mismatched to patient's size. Recently there has been a move towards flexible coil technology, which is more conformal to the human anatomy. Despite the advances of so-called flexible surface coil arrays, these coils are still relatively rigid and limited in terms of design conformability, compromising signal-to-noise ratio (SNR) for flexibility, and are not designed for optimum parallel imaging performance. The purpose of this study is to report on the development and characterization of a 15-channel flexible foot and ankle coil, rapidly designed and constructed using highly decoupled radio-frequency (RF) coil elements. Coil performance was evaluated by performing SNR and g-factor measurements. In vivo testing was performed in a healthy volunteer using both the 15-channel coil and a commercially available 8-channel foot coil. The highly decoupled elements used in this design allow for extremely rapid development and prototyping of application-specific coils for different patient sizes (adult vs child) with minimal additional design consideration in terms of coil overlap and geometry. Image quality was comparable to a commercially available RF coil. |
| Databáze: |
MEDLINE |
| Externí odkaz: |
|
