| Autor: |
Rey-Merchán MDC; Consejería de Educación y Deporte, Junta de Andalucía, Spain., Gómez-de-Gabriel JM; System Engineering and Automation Department, University of Málaga, Spain., Fernández-Madrigal JA; System Engineering and Automation Department, University of Málaga, Spain., López-Arquillos A; Economics and Business Management Department, University of Málaga, Spain. |
| Jazyk: |
angličtina |
| Zdroj: |
International journal of occupational safety and ergonomics : JOSE [Int J Occup Saf Ergon] 2022 Mar; Vol. 28 (1), pp. 590-599. Date of Electronic Publication: 2020 Sep 18. |
| DOI: |
10.1080/10803548.2020.1815393 |
| Abstrakt: |
Fall from height is a cause of concern in the construction sector. Appropriate use of a harness can be the difference between an incident or a critical accident. Monitoring the proper use of a harness in the workplace using Bluetooth Low Energy (BLE) devices is a recent and effective approach. The aim of this article is to identify typical limitations in a BLE monitoring system in order to propose solutions according to the existing literature. Alternative solutions found in the literature showed that the integration of BLE with other technologies such as building information modeling, radio-frequency identification or the global positioning system can improve the effectiveness of current monitoring approaches based only on BLE and reduce rates of fall from height accidents. For correct integration, both technological factors (cost, compatibility, data transmission) and cultural factors (social acceptance, procedures, etc.) must be taken into account. |
| Databáze: |
MEDLINE |
| Externí odkaz: |
|
