Preliminary Assessment of Ferrate Treatment of Metals in Acid Mine Drainage.

Autor: Goodwill JE, LaBar J, Slovikosky D, Strosnider WHJ
Jazyk: angličtina
Zdroj: Journal of environmental quality [J Environ Qual] 2019 Sep; Vol. 48 (5), pp. 1549-1556.
DOI: 10.2134/jeq2019.02.0079
Abstrakt: We report a preliminary assessment of ferrate [Fe(VI)] for the treatment of acid mine drainage (AMD), focused on precipitation of metals (i.e., iron [Fe] and manganese [Mn]) and subsequent removal. Two dosing approaches were studied to simulate the two commercially viable forms of Fe(VI) production: Fe(VI) only, and Fe(VI) with sodium hydroxide (NaOH). Subsequent metal speciation was assessed via filter fractionation. When only Fe(VI) was added, the pH remained <3.6, and the precipitation of Mn and Fe was <30 and <70%, respectively, at the highest, stoichiometrically excessive Fe(VI) dose. When NaOH and Fe(VI) were added simultaneously, precipitation of Mn was much more complete, at doses near the predicted oxidation stoichiometric requirement. The optimal dosage of Fe(VI) for Mn treatment was 25 μM. The formation of Mn(VII) was noted at Fe(VI) dosages above the stoichiometric requirement, which would be problematic in full-scale AMD treatment systems. Precipitation of Fe was >99% when only NaOH was added, indicating that oxidation by Fe(VI) did not play a significant role when added. The Fe(III) and Al(III) particles were relatively large, suggesting probable success in subsequent removal through sedimentation. Resultant Mn-oxide particles were relatively small, indicating that additional particle destabilization may be required to meet Mn effluent goals. Ferrate seems viable for the treatment of AMD, especially when sourced through onsite generation due to the coexistence of NaOH in the product stream. More research on the use of Fe(VI) for AMD treatment is required to answer extant questions.
(© 2019 The Author(s). Re-use requires permission from the publisher.)
Databáze: MEDLINE
Externí odkaz: