| Autor: |
Verma R; Department of Materials Science and Engineering , Chonnam National University , 77, Yongbongro , Bukgu, Gwangju 61186 , South Korea., Didwal PN; Department of Materials Science and Engineering , Chonnam National University , 77, Yongbongro , Bukgu, Gwangju 61186 , South Korea., Ki HS; Department of Materials Science and Engineering , Chonnam National University , 77, Yongbongro , Bukgu, Gwangju 61186 , South Korea., Cao G; Department of Materials Science and Engineering , University of Washington , Seattle , Washington 98195 , United States., Park CJ; Department of Materials Science and Engineering , Chonnam National University , 77, Yongbongro , Bukgu, Gwangju 61186 , South Korea. |
| Abstrakt: |
New anode materials with large capacity and long cyclability for next-generation potassium-ion batteries (PIBs) are required. PIBs are in the initial stage of investigation and only a few anode materials have been explored. In this study, for the first time, an SnP 3 /C nanocomposite with superior cyclability and rate performance was evaluated as an anode for PIBs. The SnP 3 /C nanocomposite was synthesized by a facile and cost-effective high-energy ball-milling technique. The SnP 3 /C electrode delivered a first reversible capacity of 410 mAh g -1 and maintained 408 mAh g -1 after 50 cycles at a specific current of 50 mA g -1 . After 80 cycles at a high specific current of 500 mA g -1 , a high capacity of 225 mAh g -1 remained. From a crystallographic analysis, it was suggested that the SnP 3 /C nanocomposite underwent a sequential and reversible conversion and alloying reactions. The excellent cycling stability and rate capability of the SnP 3 /C electrode were attributed to the nanosized SnP 3 particles and carbon buffer layer, which supplied channels for the migration of K-ions and mitigated the stress induced by a large volume change during potassiation/depotassiation. In addition, a full cell composed of the SnP 3 /C nanocomposite anode and potassium Prussian blue cathode exhibited a reversible capacity of 305 mAh g -1 at a specific current of 30 mA g -1 and retained 71.7% of the original capacity after 30 cycles. These results are important for understanding the electrochemical process of the SnP 3 /C nanocomposite and using the SnP 3 /C as an anode for PIBs. |
