| Autor: |
De León MA; Laboratorio de Fisicoquímica de Superficies, DETEMA, Facultad de Química, Universidad de la República, Gral. Flores 2124, CC 1157, CP 11800, Montevideo, Uruguay., Sergio M; Laboratorio de Fisicoquímica de Superficies, DETEMA, Facultad de Química, Universidad de la República, Gral. Flores 2124, CC 1157, CP 11800, Montevideo, Uruguay., Bussi J; Laboratorio de Fisicoquímica de Superficies, DETEMA, Facultad de Química, Universidad de la República, Gral. Flores 2124, CC 1157, CP 11800, Montevideo, Uruguay., Ortiz de la Plata GB; INTEC, Universidad Nacional del Litoral-CONICET, Ruta Nacional No.168, Km 0, Santa Fe, Argentina., Alfano OM; INTEC, Universidad Nacional del Litoral-CONICET, Ruta Nacional No.168, Km 0, Santa Fe, Argentina. alfano@intec.unl.edu.ar. |
| Abstrakt: |
A regional raw clay was used as the starting material to prepare iron-pillared clays with different iron contents. The catalytic activity of these materials was tested in the heterogeneous photo-Fenton process, applied to the degradation of 2-chlorophenol chosen as the model pollutant. Different catalyst loads between 0.2 and 1.0 g L -1 and pH values between 3.0 and 7.0 were studied. The local volumetric rate of photon absorption (LVRPA) in the reactor was evaluated solving the radiative transfer equation applying the discrete ordinate method and using the optical properties of the catalyst suspensions. The photonic and quantum efficiencies of the 2-chlorophenol degradation depend on both the catalyst load and the iron content of the catalyst. The higher values for these parameters, 0.080 mol Einstein -1 and 0.152 mol Einstein -1 , respectively, were obtained with 1.0 g L -1 of the catalyst with the higher iron content (17.6%). For the mineralization process, photonic and quantum efficiencies depend mainly on the catalyst load. Therefore, it was possible to employ a natural and cheap resource from the region to obtain pillared clay-based catalysts to degrade organic pollutants in water. |
Full text from SpringerLink