| Autor: |
Abu Amr SS; MICET),Melaka,Malaysian Institute of Chemical and Bioengineering Technology, Universiti Kuala Lumpur (UniKl, MICET), Alor Gajah 78000, Melaka, Malaysia., Alkarkhi AFM; MICET),Melaka,Malaysian Institute of Chemical and Bioengineering Technology, Universiti Kuala Lumpur (UniKl, MICET), Alor Gajah 78000, Melaka, Malaysia., Alslaibi TM; Civil Engineering Department, Palestine University, Gaza Strip, Palestine., Abujazar MSS; Faculty of sciences, Al-Aqsa University, Gaza, Palestine. |
| Jazyk: |
angličtina |
| Zdroj: |
Data in brief [Data Brief] 2018 May 24; Vol. 19, pp. 951-958. Date of Electronic Publication: 2018 May 24 (Print Publication: 2018). |
| DOI: |
10.1016/j.dib.2018.05.111 |
| Abstrakt: |
Although landfilling is still the most suitable method for solid waste disposal, generation of large quantity of leachate is still considered as one of the main environmental problem. Efficient treatment of leachate is required prior to final discharge. Persulfate (S 2 O 8 2- ) recently used for leachate oxidation, the oxidation potential of persulfate can be improved by activate and initiate sulfate radical. The current data aimed to evaluate the performance of utilizing Al 2 SO4 reagent for activation of persulfate to treat landfill leachate. The data on chemical oxygen demand (COD), color, and NH 3 -H removals at different setting of the persulfate, Al 2 SO 4 dosages, pH, and reaction time were collected using a central composite design (CCD) were measured to identify the optimum operating conditions. A total of 30 experiments were performed, the optimum conditions for S 2 O 8 2- /Al 2 SO 4 oxidation process was obtained. Quadratic models for chemical oxygen demand (COD), color, and NH 3 -H removals were significant with p-value < 0.0001. The experimental results were in agreement with the optimum results for COD and NH 3 -N removal rates to be 67%, 81%, and 48%, respectively). The results obtained in leachate treatment were compared with those from other treatment processes, such as S 2 O 8 2- only and Al 2 SO 4 only, to evaluate its effectiveness. The combined method (i.e., /S 2 O 8 2- /Al 2 SO 4 ) showed higher removal efficiency for COD, color, and NH 3 -N compared with other studied applications. |
| Databáze: |
MEDLINE |
| Externí odkaz: |
|
