Laser and electron-beam powder-bed additive manufacturing of metallic implants: A review on processes, materials and designs.

Autor: Sing SL; SIMTech-NTU Joint Laboratory (3D Additive Manufacturing), Nanyang Technological University, HW3-01-01, 65A Nanyang Drive, Singapore 637333.; Singapore Centre for 3D Printing, School of Mechanical & Aerospace Engineering, Nanyang Technological University, HW1-01-05, 2A Nanyang Link, Singapore 637372., An J; Singapore Centre for 3D Printing, School of Mechanical & Aerospace Engineering, Nanyang Technological University, HW1-01-05, 2A Nanyang Link, Singapore 637372., Yeong WY; SIMTech-NTU Joint Laboratory (3D Additive Manufacturing), Nanyang Technological University, HW3-01-01, 65A Nanyang Drive, Singapore 637333.; Singapore Centre for 3D Printing, School of Mechanical & Aerospace Engineering, Nanyang Technological University, HW1-01-05, 2A Nanyang Link, Singapore 637372., Wiria FE; SIMTech-NTU Joint Laboratory (3D Additive Manufacturing), Nanyang Technological University, HW3-01-01, 65A Nanyang Drive, Singapore 637333.; Singapore Institute of Manufacturing Technology, 71 Nanyang Drive, Singapore 638075.
Jazyk: angličtina
Zdroj: Journal of orthopaedic research : official publication of the Orthopaedic Research Society [J Orthop Res] 2016 Mar; Vol. 34 (3), pp. 369-85. Date of Electronic Publication: 2015 Oct 29.
DOI: 10.1002/jor.23075
Abstrakt: Additive manufacturing (AM), also commonly known as 3D printing, allows the direct fabrication of functional parts with complex shapes from digital models. In this review, the current progress of two AM processes suitable for metallic orthopaedic implant applications, namely selective laser melting (SLM) and electron beam melting (EBM) are presented. Several critical design factors such as the need for data acquisition for patient-specific design, design dependent porosity for osteo-inductive implants, surface topology of the implants and design for reduction of stress-shielding in implants are discussed. Additive manufactured biomaterials such as 316L stainless steel, titanium-6aluminium-4vanadium (Ti6Al4V) and cobalt-chromium (CoCr) are highlighted. Limitations and future potential of such technologies are also explored.
(© 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc.)
Databáze: MEDLINE
Externí odkaz: