Characterization of microchip electrophoresis devices fabricated by direct-printing process with colored toner.

Autor: Gabriel EF; Instituto de Química, Universidade Federal de Goiás, Goiânia, GO, Brazil., do Lago CL, Gobbi ÅL, Carrilho E, Coltro WK
Jazyk: angličtina
Zdroj: Electrophoresis [Electrophoresis] 2013 Aug; Vol. 34 (15), pp. 2169-76. Date of Electronic Publication: 2013 Jul 12.
DOI: 10.1002/elps.201300024
Abstrakt: This paper reports for the first time the use of colored toner to produce polyester toner (PT) ME devices. Colored PT devices were designed in drawing software and printed on a polyester film using a color laser printer with 3600 dpi resolution. The colored toner is composed of a copolymer mixture (styrene and acrylate), wax, silicon dioxide, and pigments. The presence of silica in the toner composition has enhanced the EOF magnitude and improved the analytical performance. For a pH range between 2 and 12, the EOF measured on a magenta PT chip, for example, ranged from 3.8 to 5.8 (× 10(-4) cm(2) V(-1) s(-1) ). Typical separations of inorganic cations (K(+) , Na(+) , and Li(+) ) were used as model system to investigate the analytical feasibility of the proposed devices. The repeatability for the migration times of all analytes exhibited RSD values lower than 1% (n = 10). The separation efficiencies found on colored PT devices ranged from 10 000 to 49 000 plates/m, which means between 7 and 23% of the maximum theoretical efficiency on this microfluidic platform (1.85 × 10(5) plates/m). The improvements achieved on the proposed devices are associated with the small additional amount of silica on the toner composition as well as the printing of channels with smoother surfaces and better uniformity when compared to the conventional PT chips printed with monochromatic laser printers.
(© 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)
Databáze: MEDLINE
Externí odkaz: